Driving Test Practice
English

Your stateNot chosenChoose it to see the page numbers of your state's own CDL manual.

General Knowledge: Vehicle inspection — Part 5

Questions in this part include: “To test for hydraulic leaks, how many times do you pump the brake pedal first?” · “During the brake test, the vehicle pulls to one side. What can this mean?”

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

20 questions · About 8 min

Answer to start, or tap Start below:

To test for hydraulic leaks, how many times do you pump the brake pedal first?

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 3 to answer and Enter for the next question

Questions are written in our own words from the CDL manual; they are not the real test's questions. With your state chosen, every answer gives its page in your state's CDL manual. Without a state, answers cite the CDL manual, national model as printed by New Jersey (July 2017).

All 17 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. To test for hydraulic leaks, how many times do you pump the brake pedal first?

    • Three times
    • Five times
    • Ten times
    Show answer

    Correct answer: Three times

    Pump the pedal three times, then press firmly and hold it to see whether it sinks.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-216)

  2. After pumping a hydraulic brake pedal, how long do you hold firm pressure on it?

    • Five seconds
    • Two seconds
    • Fifteen seconds
    Show answer

    Correct answer: Five seconds

    Keep firm pressure on the pedal for five seconds; a pedal that stays put is what you want to see.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-217)

  3. You hold firm pressure on a hydraulic brake pedal and it slowly sinks. What does that suggest?

    • The brakes are working normally
    • The brake lining is newly adjusted and fine
    • A leak or another problem in the brake system
    Show answer

    Correct answer: A leak or another problem in the brake system

    The pedal should stay still under firm pressure. If it moves, there may be a leak or another problem to fix before driving.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-218)

  4. What do you do first when you begin testing the parking brake?

    • Fasten your safety belt
    • Place the vehicle in a low gear
    • Release the trailer parking brake
    Show answer

    Correct answer: Fasten your safety belt

    Before testing the parking brake, fasten your safety belt.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-219)

  5. How do you test whether the parking brake holds the vehicle?

    • Push the brake pedal hard in a low gear
    • Pull forward hard against it in a high gear
    • Pull gently forward against it in a low gear
    Show answer

    Correct answer: Pull gently forward against it in a low gear

    With the parking brake set and the vehicle in a low gear, pull forward gently. The brake should hold the vehicle in place.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-220)

  6. How do you test the trailer's parking brake on its own?

    • Set the trailer brake and release the power unit's parking brakes
    • Set both parking brakes and shift to neutral
    • Release the trailer brake and set the power unit's brakes
    Show answer

    Correct answer: Set the trailer brake and release the power unit's parking brakes

    Test the trailer alone by setting its parking brake while the power unit's parking brakes are released.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-221)

  7. During the test, the parking brake does not hold the vehicle. What should be done?

    • Get the faulty brake fixed
    • Chock the wheels and continue the trip
    • Report it at the end of the trip and drive on
    Show answer

    Correct answer: Get the faulty brake fixed

    A parking brake that does not hold the vehicle is faulty and has to be repaired.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-222)

  8. At about what speed do you test the stopping action of the service brake?

    • 25 miles per hour
    • 5 miles per hour
    • 15 miles per hour
    Show answer

    Correct answer: 5 miles per hour

    Move at about five miles per hour and push the brake pedal firmly to check the stopping action.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-223)

  9. During the brake test, the vehicle pulls to one side. What can this mean?

    • Trouble with the brakes
    • The fuel tank is nearly empty
    • The road crown is too steep
    Show answer

    Correct answer: Trouble with the brakes

    Pulling to the left or right when you brake can be a sign of brake trouble.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-224)

  10. Which signs during the brake test can mean there is a problem?

    • The pedal feels firm and the vehicle stops straight
    • The vehicle stops within one truck length
    • An unusual pedal feel or a delay before the vehicle stops
    Show answer

    Correct answer: An unusual pedal feel or a delay before the vehicle stops

    An unusual pedal feel or a delayed stopping action can both point to brake trouble.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-225)

  11. You find something unsafe during your inspection. What must you do?

    • Drive carefully and report it at the end of the trip
    • Continue if it is a small problem and the load is light
    • Get it fixed, because the law forbids operating an unsafe vehicle
    Show answer

    Correct answer: Get it fixed, because the law forbids operating an unsafe vehicle

    Unsafe items must be repaired, since both federal and state law prohibit driving an unsafe vehicle.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-226)

  12. Which group of items should a driver keep checking at regular times on the road?

    • Spare fuses, triangles and fire extinguisher
    • Gauges, mirrors, tires and cargo covers
    • Fluid levels under the hood and belt tension
    Show answer

    Correct answer: Gauges, mirrors, tires and cargo covers

    On the road a driver keeps watching the gauges, mirrors, tires, cargo and cargo covers, and lights, not only before the trip.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-227)

  13. While driving, you notice an unusual smell or a strange vibration. What should you do?

    • Note it for the after-trip report and keep driving
    • Check it only if a gauge also shows a problem
    • Look into the cause of it right away
    Show answer

    Correct answer: Look into the cause of it right away

    Anything you see, hear, smell or feel that might mean trouble should be checked out, not ignored.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-228)

  14. A truck driver is hauling cargo. How soon after the trip begins must the driver first check that the cargo is secure?

    • Within the first 25 miles
    • Within the first 100 miles
    • Within the first 50 miles
    Show answer

    Correct answer: Within the first 50 miles

    A driver carrying cargo in a truck or truck tractor must check the cargo securement within the first 50 miles of the trip.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-229)

  15. After the first cargo securement check, how often must a truck driver check the cargo again?

    • Every 200 miles or four hours, whichever is first
    • Every 150 miles or three hours, whichever is first
    • Every 300 miles or five hours, whichever is first
    Show answer

    Correct answer: Every 150 miles or three hours, whichever is first

    Once the first check is done, check the cargo again after 150 miles of driving or three hours, whichever passes first.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-230)

  16. How often may a driver be required to write a report on the condition of the vehicles driven?

    • Each day
    • Once a week
    • Once a month
    Show answer

    Correct answer: Each day

    A driver may have to write a report on the condition of the vehicle or vehicles driven every day.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-231)

  17. What kinds of problems belong in a driver's end-of-day report on the vehicle?

    • Only problems that already forced the vehicle to stop
    • Any problem that affects safety or could cause a breakdown
    • Only problems the motor carrier has already heard about
    Show answer

    Correct answer: Any problem that affects safety or could cause a breakdown

    The report should list anything that affects safety or could lead to a mechanical breakdown, even if the vehicle still runs.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-232)