Driving Test Practice
English

Your stateNot chosenChoose it to see the page numbers of your state's own CDL manual.

Air Brakes: Air brake system parts — Part 3

Questions in this part include: “What is the most common type of foundation brake?” · “What does the s-cam do to the brake shoes?”

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

16 questions · About 6 min

Answer to start, or tap Start below:

What is the most common type of foundation brake?

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 3 to answer and Enter for the next question

Questions are written in our own words from the CDL manual; they are not the real test's questions. With your state chosen, every answer gives its page in your state's CDL manual. Without a state, answers cite the CDL manual, national model as printed by New Jersey (July 2017).

All 16 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. What is the most common type of foundation brake?

    • Wedge brake
    • S-cam drum brake
    • Disc brake
    Show answer

    Correct answer: S-cam drum brake

    Most foundation brakes are the s-cam drum type. Wedge and disc brakes are less common.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-034)

  2. In a drum brake, what are the wheels bolted to?

    • The brake shoes
    • The brake drums
    • The slack adjusters
    Show answer

    Correct answer: The brake drums

    Wheels are bolted to the brake drums, which are on each end of the axles.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-035)

  3. In a drum brake, where is the braking mechanism?

    • Inside the brake chamber
    • Inside the brake drum
    • Behind the slack adjuster
    Show answer

    Correct answer: Inside the brake drum

    The shoes and linings that do the braking sit inside the drum.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-036)

  4. What slows the vehicle when brake shoes and linings are pressed against the drum?

    A truck's drum brake with part of the drum cut away: two curved brake shoes with their linings around the hub, an S-shaped cam between their ends, a spring, and behind the drum a lever arm and a round air chamber.
    • Air pressure
    • Engine vacuum
    • Friction
    Show answer

    Correct answer: Friction

    The shoes rubbing the drum cause friction, which slows the vehicle and makes heat.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-037)

  5. What decides how much heat a brake drum can take without damage?

    A truck's drum brake with part of the drum cut away: two curved brake shoes with their linings around the hub, an S-shaped cam between their ends, a spring, and behind the drum a lever arm and a round air chamber.
    • The size of the slack adjuster stroke
    • The amount of air left in the tanks
    • The force and the time of brake use
    Show answer

    Correct answer: The force and the time of brake use

    A drum's heat limit depends on the force and the length of time the brakes are used.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-038)

  6. What can happen if brake drums get too hot?

    The two rear axles of a truck trailer stopped at the roadside: thin smoke rises from the wheels and a dull orange glow shows through the holes in the wheels.
    • The brake shoes grip harder
    • The brakes can stop working
    • Air pressure rises in the tanks
    Show answer

    Correct answer: The brakes can stop working

    Too much heat can make the brakes fail.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-039)

  7. In an s-cam brake, what does air pressure in the brake chamber push out?

    • A wedge that spreads the shoes
    • A power screw that clamps the pads
    • A rod that moves the slack adjuster
    Show answer

    Correct answer: A rod that moves the slack adjuster

    The chamber pushes out a rod, which moves the slack adjuster and twists the camshaft that turns the s-cam.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-040)

  8. Why is the s-cam called an s-cam?

    • It is shaped like the letter S
    • It is made for a single wheel set
    • It is used only on a single axle
    Show answer

    Correct answer: It is shaped like the letter S

    The cam has an S shape, which gives it its name.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-041)

  9. What does the s-cam do to the brake shoes?

    A truck's drum brake with part of the drum cut away: two curved brake shoes with their linings around the hub, an S-shaped cam between their ends, a spring, and behind the drum a lever arm and a round air chamber.
    • Squeezes them together around the drum
    • Pulls them away from the drum
    • Spreads them apart against the drum
    Show answer

    Correct answer: Spreads them apart against the drum

    The turning cam spreads the shoes apart so they press on the drum's inner surface.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-042)

  10. When you let up on the pedal, what draws the shoes off the drum?

    A truck's drum brake with part of the drum cut away: two curved brake shoes with their linings around the hub, an S-shaped cam between their ends, a spring, and behind the drum a lever arm and a round air chamber.
    • Air pressure
    • A spring
    • The slack adjuster
    Show answer

    Correct answer: A spring

    When the pedal is released, a spring pulls the shoes off the drum so the wheels turn freely.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-043)

  11. How does a wedge brake spread the brake shoes?

    • A power screw turns and clamps a disc
    • A push rod pushes a wedge between the shoe ends
    • A cam shaped like an S twists between them
    Show answer

    Correct answer: A push rod pushes a wedge between the shoe ends

    The push rod drives a wedge between the shoe ends and shoves the shoes against the drum.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-044)

  12. How many brake chambers can a wedge brake have?

    • One or two
    • Always two
    • Always one
    Show answer

    Correct answer: One or two

    A wedge brake can have one chamber, or two chambers pushing wedges in at both shoe ends.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-045)

  13. How are wedge brakes adjusted?

    • Some adjust themselves and some are set by hand
    • Only those with two chambers adjust themselves
    • Only those with one chamber are set by hand
    Show answer

    Correct answer: Some adjust themselves and some are set by hand

    Some wedge brakes are self-adjusting while others must be adjusted by hand.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-046)

  14. Which parts does an air disc brake have in common with an s-cam brake?

    • A brake chamber and a slack adjuster
    • A wedge and a pair of brake shoes
    • A brake drum and a return spring
    Show answer

    Correct answer: A brake chamber and a slack adjuster

    In both kinds, air pressure works on a brake chamber and a slack adjuster.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-047)

  15. What replaces the s-cam in an air-operated disc brake?

    • A wedge
    • A two-lobed camshaft
    • A power screw
    Show answer

    Correct answer: A power screw

    Air disc brakes use a power screw where s-cam brakes use the s-cam.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-048)

  16. How does an air disc brake slow the wheel?

    • Shoes spread out inside a drum
    • A wedge pushes between two shoes
    • Pads in a caliper clamp the disc
    Show answer

    Correct answer: Pads in a caliper clamp the disc

    The power screw makes the caliper pads clamp the disc, much like a large c-clamp.

    Source: ⁨CDL manual, national model as printed by New Jersey, Section 5 (July 2017)⁩

    Report a problem with this question (cdl-ab-s5-049)