Pennsylvania: Emergency vehicles & work zones — Part 1 Practice Test
Questions in this part include: “If you are pulled over by police for a traffic violation in a work zone and your headlights are not on, what happens?” · “What might a flagger directing traffic in a work zone be wearing?”
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
Answer to start, or tap Start below:
If you are pulled over by police for a traffic violation in a work zone and your headlights are not on, what happens?
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
- Keyboard: press 1 to 4 to answer and Enter for the next question
Questions are original and based on the official manual "Pennsylvania Driver's Manual" (Pub 95), Pennsylvania Department of Transportation (PennDOT), Bureau of Driver Licensing.
All 22 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
Under Pennsylvania law, when must you turn on your headlights while traveling through a posted work zone?
- Only at night or in poor visibility
- Only when workers are present on the roadway
- Only if directed by a flagger
- At any time of day, even when the zone is not active
Show answer
Correct answer: At any time of day, even when the zone is not active
Turning on your headlights in a work zone is the law for all posted work zones, not just active ones, no matter what time of day.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
If you are pulled over by police for a traffic violation in a work zone and your headlights are not on, what happens?
- You are fined an additional $25
- No additional penalty beyond the original violation
- Your license is automatically suspended
- You receive two additional points only, with no fine
Show answer
Correct answer: You are fined an additional $25
If you are pulled over for a traffic violation in a work zone and your headlights are not on, you will be fined an additional $25.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
What is an "active work zone"?
- Any work zone with signs posted, even if no workers are present
- The part with workers on the road or on the shoulder next to an open lane
- A work zone with no speed limit changes
- Only zones with lane closures overnight
Show answer
Correct answer: The part with workers on the road or on the shoulder next to an open lane
An active work zone is the portion of a work zone where construction, maintenance or utility workers are on the roadway, or on the shoulder next to an open travel lane.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
A ROAD WORK AHEAD sign informs you that:
- the road ahead is permanently closed
- a detour is mandatory
- road work is ahead and you should slow down
- construction ahead has been completed
Show answer
Correct answer: road work is ahead and you should slow down
This sign informs you there is road work ahead and cautions you to slow down.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
A LANE CLOSED AHEAD sign, such as one reading "RIGHT LANE CLOSED 1000 FT," tells you:
- a particular lane will be closed at a specified distance ahead
- the entire roadway is closed 1000 feet ahead
- the speed limit is reduced to 1000 feet per minute
- there is no closure, only a warning of possible future work
Show answer
Correct answer: a particular lane will be closed at a specified distance ahead
This sign tells you a particular lane will be closed at a specified distance ahead.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
A WORKERS AHEAD sign warns that:
- all lanes are closed ahead
- workers may be on or very close to the roadway
- the work zone has ended
- only pedestrians are affected, not drivers
Show answer
Correct answer: workers may be on or very close to the roadway
Workers may be on or very close to the roadway, so take special care when traveling through the area.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
According to the manual, what can happen if a highway worker reports a motorist who speeds or drives unsafely in a work zone to police?
- Nothing, since highway workers cannot file such reports
- Only a warning letter is sent to the driver
- The police may issue a ticket, resulting in fines and points
- The report is only used for statistical purposes
Show answer
Correct answer: The police may issue a ticket, resulting in fines and points
Highway workers have forms to report unsafe motorists to police, who may then issue a ticket, resulting in fines and points.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
A FLAGGER AHEAD (ROAD CONSTRUCTION AHEAD) sign tells drivers that:
- all workers have left the roadway
- the road is closed permanently
- no further signs will follow
- a flagger is controlling traffic ahead
Show answer
Correct answer: a flagger is controlling traffic ahead
This sign shows that a flagger is controlling traffic ahead.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
In a highway work zone, a flagger controls traffic using:
- STOP and SLOW paddles or a red flag
- A handheld stop sign only
- Orange traffic cones only
- Hand signals only, no paddles or flags
Show answer
Correct answer: STOP and SLOW paddles or a red flag
Flaggers use STOP and SLOW paddles or a red flag to signal you to stop or slow down as you approach and travel through a work zone.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
When approaching and traveling through a work zone where a flagger is present, you should:
- Turn on your hazard lights and stop
- Pay special attention to the flagger's signals
- Sound your horn to alert the flagger
- Proceed at normal speed unless flagged down
Show answer
Correct answer: Pay special attention to the flagger's signals
The manual advises drivers to pay special attention to flaggers when approaching and traveling through a work zone.
Source: Pennsylvania Driver's Manual (Pub 95), page 18 · Open this page in the manual (Manual page 18)
-
A large electronic arrow panel in a work zone showing a MOVE/MERGE RIGHT or MOVE/MERGE LEFT message tells you to:
- Stop immediately and wait
- Turn around and find another route
- Begin merging well in advance of the sign
- Ignore it unless a flagger is also present
Show answer
Correct answer: Begin merging well in advance of the sign
Electric arrow panels advise approaching motorists of lane closures; you should begin your merge well in advance of the sign.
Source: Pennsylvania Driver's Manual (Pub 95), page 19 · Open this page in the manual (Manual page 19)
-
When a work-zone arrow panel displays a caution pattern instead of a directional arrow, it means:
- The equipment is malfunctioning and should be ignored
- Traffic is closed in both directions ahead
- Merge left immediately
- There is a work area ahead next to the travel lane
Show answer
Correct answer: There is a work area ahead next to the travel lane
An arrow panel displaying a caution message indicates a work area ahead next to the travel lane; drive with extra caution.
Source: Pennsylvania Driver's Manual (Pub 95), page 19 · Open this page in the manual (Manual page 19)
-
Barrels, tubes, cones and vertical panels used to guide drivers through changing traffic patterns in a work zone are known as:
- Channeling devices
- Flagger stations
- Guide signs
- Route markers
Show answer
Correct answer: Channeling devices
Barrels, tubes, cones and vertical panels are channeling devices used in work zones to guide you through changing traffic patterns and keep you away from hazards.
Source: Pennsylvania Driver's Manual (Pub 95), page 19 · Open this page in the manual (Manual page 19)
-
If you cannot move into a nonadjacent lane while passing an emergency scene, police stop, or a tow truck picking up a disabled vehicle, you must reduce your speed to at least how much below the posted speed limit?
- 5 mph
- 10 mph
- 15 mph
- 20 mph
Show answer
Correct answer: 20 mph
If you cannot move over, you must reduce your speed to at least 20 miles per hour below the posted speed limit.
Source: Pennsylvania Driver's Manual (Pub 95), page 43 · Open this page in the manual (Manual page 43)
-
If an emergency vehicle is approaching while you are already inside a roundabout, what should you do?
- Stop immediately where you are inside the roundabout
- Speed up to exit before it arrives
- Reverse back to the entry point
- Immediately exit the roundabout and pull to the side
Show answer
Correct answer: Immediately exit the roundabout and pull to the side
If you are in the roundabout when an emergency vehicle approaches, immediately exit and pull to the side — never stop in the roundabout.
Source: Pennsylvania Driver's Manual (Pub 95), page 50 · Open this page in the manual (Manual page 50)
-
How are work zones typically identified, according to the manual?
- Green directional arrows
- White dashed lines only
- Blue reflective markers
- Orange channelizing devices
Show answer
Correct answer: Orange channelizing devices
Work zones are identified with orange channelizing devices, such as cones, or other temporary traffic control devices.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)
-
What might a flagger directing traffic in a work zone be wearing?
- A dark business suit
- Reflective clothing
- A police uniform only
- Casual clothing with no markings
Show answer
Correct answer: Reflective clothing
The manual notes you may encounter a flagger directing traffic and wearing reflective clothing.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)
-
Warning signs, advance warning vehicles, or variable message boards may be placed how far before a work zone?
- A minimum of 200 feet
- A minimum of 100 feet
- A minimum of 50 feet
- A minimum of 1,000 feet
Show answer
Correct answer: A minimum of 200 feet
These warnings may be placed a minimum of 200 feet approaching a work zone.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)
-
What is the purpose of a 'shadow vehicle' used during moving work operations such as line painting or mowing?
- To measure the road surface
- To carry extra equipment
- To transport workers to the site
- To warn drivers and protect the crew
Show answer
Correct answer: To warn drivers and protect the crew
Shadow vehicles at the back of a moving operation warn motorists there is a work zone ahead and protect the crew.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)
-
May you pass a moving work operation, such as a shadow vehicle, in a work zone?
- Yes, but only on the right
- Yes, at any speed
- No, not unless directed to do so
- Yes, always, if the lane is clear
Show answer
Correct answer: No, not unless directed to do so
The manual instructs drivers not to pass a moving operation unless directed to.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)
-
What kinds of abnormal conditions should you be prepared for in an active work zone?
- Additional passing lanes and wider shoulders
- Extra-wide lanes and freshly smoothed pavement
- Narrow lanes, rough pavement and abrupt lane shifts
- Higher speed limits and fewer warning signs
Show answer
Correct answer: Narrow lanes, rough pavement and abrupt lane shifts
In an active work zone, watch for construction workers and be prepared for narrow lanes, rough pavement, uneven lanes, and abrupt lane shifts.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)
-
By law, what must you do with your headlights when driving through an active work zone?
- Turn them off completely
- Flash them repeatedly
- Use only your daytime running lights
- Turn them on
Show answer
Correct answer: Turn them on
By law, you must turn on your vehicle's headlights, not just the daytime running lights, when driving through an active work zone.
Source: Pennsylvania Driver's Manual (Pub 95), page 54 · Open this page in the manual (Manual page 54)