Washington, D.C.: Traffic signals — Part 1 Practice Test
Questions in this part include: “What does HAWK stand for?” · “How do HAWK signals with Accessible Pedestrian Signal (APS) equipment announce that the WALK signal is on?”
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
Answer to start, or tap Start below:
What does HAWK stand for?
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
- Keyboard: press 1 to 4 to answer and Enter for the next question
Questions are original and based on the official manual "District of Columbia Driver Manual" (Updated January 2024), District of Columbia Department of Motor Vehicles (DC DMV).
All 18 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
What does HAWK stand for?
- Highway Activated Walkway Key
- High-Intensity Activated crossWalk
- Heavy-Traffic Alert for Walkers
- Hazard Alert for Walking Kids
Show answer
Correct answer: High-Intensity Activated crossWalk
HAWK stands for High-Intensity Activated crossWalk.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
What is a HAWK signal designed to do?
- Control traffic at freeway on-ramps
- Slow traffic in school zones
- Warn drivers of a railroad crossing
- Help pedestrians safely cross busy streets
Show answer
Correct answer: Help pedestrians safely cross busy streets
A HAWK signal is a signal-beacon designed to help pedestrians safely cross busy streets.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
What is another name for the HAWK signal?
- Pedestrian Hybrid Beacon
- Pedestrian Warning Beacon
- Rectangular Rapid Flashing Beacon
- Crosswalk Alert Beacon
Show answer
Correct answer: Pedestrian Hybrid Beacon
The manual says the HAWK signal is also known as a Pedestrian Hybrid Beacon.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
Which agency has approved the HAWK signal for use?
- The Metropolitan Police Department
- The Department of Motor Vehicles
- The Federal Highway Administration
- The National Safety Council
Show answer
Correct answer: The Federal Highway Administration
The HAWK signal has been approved for use by the Federal Highway Administration.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
What does a HAWK signal use to stop traffic so pedestrians can cross?
- A stop sign
- A red signal
- A railroad gate
- A flashing white light
Show answer
Correct answer: A red signal
A HAWK signal stops traffic with a red signal and lets pedestrians cross with a WALK signal.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
At certain locations, how can a HAWK signal be activated besides a push button?
- By a sensor that detects approaching vehicles at speed
- By a timer set to run every minute
- By a remote carried by police officers
- By automatically detecting pedestrians waiting to cross
Show answer
Correct answer: By automatically detecting pedestrians waiting to cross
At certain locations the signal detects pedestrians waiting to cross and activates itself.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
How do HAWK signals with Accessible Pedestrian Signal (APS) equipment announce that the WALK signal is on?
- An audible message and a vibrating arrow button
- A siren and a vibrating strip in the crosswalk
- A recorded message and a flashing white lamp
- A bell tone and a flashing yellow arrow light
Show answer
Correct answer: An audible message and a vibrating arrow button
An audible message and a vibrating arrow button tell disabled pedestrians that the WALK signal is on.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
If a side street meets a HAWK signal, what controls the side street traffic?
- A traffic signal
- A yield sign
- A stop sign
- A flashing beacon
Show answer
Correct answer: A stop sign
A side street at a HAWK signal continues to be controlled by a stop sign.
Source: District of Columbia Driver Manual (Updated January 2024), page 7
-
A HAWK signal has all of its lights dark (off). What should a motorist do?
- Stop and wait
- Slow down and prepare to stop
- Stop, then proceed if clear
- Proceed
Show answer
Correct answer: Proceed
With all lights dark the motorist-side instruction is to proceed.
Source: District of Columbia Driver Manual (Updated January 2024), page 8
-
A HAWK signal shows a flashing yellow light after a pedestrian has activated it. What should a motorist do?
- Proceed with caution
- Stop and wait
- Slow down and prepare to stop
- Stop, then proceed with caution if clear
Show answer
Correct answer: Proceed with caution
A flashing yellow means the signal has been activated, and motorists proceed with caution.
Source: District of Columbia Driver Manual (Updated January 2024), page 8
-
A HAWK signal shows a steady yellow light. What should a motorist do?
- Proceed with caution
- Stop, then proceed with caution if clear
- Slow down and prepare to stop
- Proceed
Show answer
Correct answer: Slow down and prepare to stop
A steady yellow on a HAWK signal means slow down and prepare to stop.
Source: District of Columbia Driver Manual (Updated January 2024), page 8
-
A HAWK signal shows two steady (not flashing) red lights. What should a motorist do?
- Proceed with caution
- Stop
- Slow down and prepare to stop
- Stop, then proceed with caution if clear
Show answer
Correct answer: Stop
Two steady red lights on a HAWK signal mean stop.
Source: District of Columbia Driver Manual (Updated January 2024), page 8
-
A HAWK signal shows two flashing red lights. What should a motorist do?
- Proceed with caution without stopping
- Stop and wait until the signal goes dark
- Slow down and prepare to stop
- Stop, then proceed with caution if clear
Show answer
Correct answer: Stop, then proceed with caution if clear
Flashing red lights on a HAWK signal mean stop, then proceed with caution if the crosswalk is clear.
Source: District of Columbia Driver Manual (Updated January 2024), page 8
-
After a pedestrian pushes the button at a HAWK signal, how long may it take for the signal to change?
- Up to one minute
- Up to ten seconds
- Up to five minutes
- Up to thirty minutes
Show answer
Correct answer: Up to one minute
The pedestrian instructions say it may take up to one minute for the signal to change.
Source: District of Columbia Driver Manual (Updated January 2024), page 8
-
What is a Rectangular Rapid Flashing Beacon (RRFB)?
- A flashing red signal that closes lanes ahead of road work zones
- A beacon on school buses that shows children are boarding or leaving
- A control device used only at railroad crossings with gates
- A pedestrian-activated control device used with marked crosswalks
Show answer
Correct answer: A pedestrian-activated control device used with marked crosswalks
An RRFB is a pedestrian-activated traffic control device used with marked crosswalks.
Source: District of Columbia Driver Manual (Updated January 2024), page 10
-
Where is an RRFB placed relative to the pedestrian crossing sign and the arrow?
- Below the pedestrian crossing sign and above the arrow
- Above the pedestrian crossing sign and below the arrow
- Below both the sign and the arrow
- Above both the sign and the arrow
Show answer
Correct answer: Below the pedestrian crossing sign and above the arrow
RRFBs sit below the pedestrian crossing sign and above the arrow indication pointing at the crossing.
Source: District of Columbia Driver Manual (Updated January 2024), page 10
-
On which sides of a crosswalk are RRFBs placed?
- Only the side nearest oncoming traffic
- Only the side where pedestrians start
- Both sides
- Only the far side of the roadway
Show answer
Correct answer: Both sides
RRFBs are placed on both sides of a crosswalk.
Source: District of Columbia Driver Manual (Updated January 2024), page 10
-
How can pedestrians activate an RRFB?
- Only by a push button pressed by the pedestrian
- By push button or by automated pedestrian detection
- Only by an automatic vehicle detector
- By a signal button pressed by the driver
Show answer
Correct answer: By push button or by automated pedestrian detection
Pedestrians can activate it manually by push button or passively through an automated detection system.
Source: District of Columbia Driver Manual (Updated January 2024), page 10