West Virginia: Railroad crossings Practice Test
Advance warning signs, crossbucks, flashing lights and gates, and a vehicle stalled on the tracks.
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
Answer to start, or tap Start below:
Which describes railroad crossing signs other than the crossbuck?
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
- Keyboard: press 1 to 4 to answer and Enter for the next question
Questions are original and based on the official manual "West Virginia Driver's Licensing Handbook" (Revised July 2026), West Virginia Division of Motor Vehicles (DMV).
All 13 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
What does a round yellow-and-black sign give advance warning of?
- A railroad crossing ahead
- A school zone ahead
- A slow moving vehicle
- A lane that ends ahead
Show answer
Correct answer: A railroad crossing ahead
The yellow-and-black circle gives advance warning of a railroad crossing ahead.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 34 · Open this page in the manual (Manual page 34)
-
What is the X-shaped railroad crossing sign with black letters on white bars called?
- A crosswalk marker
- A rail yield sign
- A crossbuck
- A track bar
Show answer
Correct answer: A crossbuck
The X shape made of black letters on white bars is called a crossbuck.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
Which describes railroad crossing signs other than the crossbuck?
- Square or rectangular, green with white symbols
- Round or diamond shaped, yellow with black symbols
- Octagonal, red with large white letters on it
- Round, white with a red border and black text
Show answer
Correct answer: Round or diamond shaped, yellow with black symbols
Railroad crossing signs can be round or diamond shaped and yellow with black symbols.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
What does a sign below the crossbuck tell you when there are two or more tracks?
- The speed of approaching trains
- Which track the next train will use
- The number of trains that pass each day
- The number of tracks
Show answer
Correct answer: The number of tracks
A sign below the crossbuck shows the number of tracks when there are two or more.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
Which devices may signal the approach of a train at a railroad crossing?
- Bells, flashers, and automatic gates
- Sirens, stop signs, and yield signs
- Horns, strobe lamps, and speed bumps
- Rumble strips, cones, and barricades
Show answer
Correct answer: Bells, flashers, and automatic gates
Electrical devices at some crossings include bells, flashers, and automatic gates.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
At a railroad crossing, you must yield to which trains?
- Only passenger trains
- Only trains you can see
- All trains
- Only trains on the nearest track
Show answer
Correct answer: All trains
The handbook says you must yield to all trains.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
What results from failing to stop when railroad crossing lights are flashing or a barrier is down?
- A written warning only
- A citation
- No penalty if no train is coming
- Loss of your license for one year
Show answer
Correct answer: A citation
Failing to stop when lights are flashing or a barrier is down results in a citation.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
At a crossing with two or more tracks, what must you be alert for?
- A change in the speed limit between the tracks
- Trains that are going in the same direction only
- A gate that stays up after the train passes
- A second train on the other set of tracks
Show answer
Correct answer: A second train on the other set of tracks
With two or more tracks, a second train may be coming on the other set of tracks.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
You should not enter a railroad crossing until when?
- Until the vehicle ahead has moved far enough ahead that you can clear the tracks
- Until you have honked your horn twice and looked both ways
- Until the vehicle behind you has moved back from the tracks
- Until the vehicle ahead of you has crossed the second set of tracks
Show answer
Correct answer: Until the vehicle ahead has moved far enough ahead that you can clear the tracks
If you enter before you can clear the tracks you may be trapped and hit by another vehicle or a train.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 39 · Open this page in the manual (Manual page 39)
-
Stopping, standing or parking is not allowed within how many feet of the nearest rail of a railroad crossing?
- 10 feet
- 25 feet
- 50 feet
- 75 feet
Show answer
Correct answer: 50 feet
You may not stop, stand or park within 50 feet of the nearest rail of a railroad crossing.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 45 · Open this page in the manual (Manual page 45)
-
Where must you not change lanes?
- In an intersection or at a railroad crossing
- On a multi-lane road with light traffic
- On an interstate while at the speed limit
- Beside a parked vehicle at a curb
Show answer
Correct answer: In an intersection or at a railroad crossing
The handbook says not to change lanes in an intersection or at a railroad crossing.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 48 · Open this page in the manual (Manual page 48)
-
Passing is prohibited within 100 feet of which of these?
- Any railroad crossing
- Any mile marker
- Any rest area sign
- Any speed limit sign
Show answer
Correct answer: Any railroad crossing
West Virginia drivers may not pass within 100 feet of any railroad crossing.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 49 · Open this page in the manual (Manual page 49)
-
Your vehicle is stalled on railroad tracks and a train is coming. What should you do?
- Stay in the vehicle and sound your horn
- Get out of the vehicle and proceed to a safe location
- Stay in the vehicle and keep trying to restart the engine
- Stay inside with your seat belt fastened and wait
Show answer
Correct answer: Get out of the vehicle and proceed to a safe location
If a train is coming, you leave the stalled vehicle and go to a safe location.
Source: West Virginia Driver's Licensing Handbook (Revised July 2026), page 72 · Open this page in the manual (Manual page 72)