General Knowledge: Controlling speed
Stopping distance, and matching speed to the road surface, curves, visibility, traffic and downgrades. Split into 2 shorter tests so you're not stuck in one long quiz.
Independent educational site · not affiliated with any government agency or DMV
Choose a part
Controlling speed — Part 1
Questions in this part include: “Which three distances are added together to find your total stopping distance?”
Controlling speed — Part 2
Questions in this part include: “Why is a road especially slippery just after rain begins?”
Questions are written in our own words from the CDL manual; they are not the real test's questions. With your state chosen, every answer gives its page in your state's CDL manual. Without a state, answers cite the CDL manual, national model as printed by New Jersey (July 2017).
All 43 Controlling speed questions with answers
Choose a part above to take a practice test, or study every question and answer here.
Show the questions and answersHide the questions
1Part 122 questions
-
Which three distances are added together to find your total stopping distance?
- Perception, following and braking distance
- Perception, reaction and braking distance
- Reaction, braking and skidding distance
Show answer
Correct answer: Perception, reaction and braking distance
Total stopping distance is the distance covered while you notice the hazard, while you move your foot to the brake, and while the vehicle slows to a stop.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
About how long does an alert driver take, on average, to perceive a hazard?
- Three seconds
- ½ second
- 1¾ seconds
Show answer
Correct answer: 1¾ seconds
An alert driver needs about 1¾ seconds from the moment the eyes see a hazard until the brain recognizes it.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
At 55 mph, how far does a vehicle travel during the average perception time?
- 142 feet
- 112 feet
- 172 feet
Show answer
Correct answer: 142 feet
During the average perception time of an alert driver, a vehicle at 55 mph covers 142 feet before the hazard is recognized.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
What is the average driver reaction time, from recognizing a hazard to hitting the brakes?
- 2 to 3 seconds
- 1½ to 2 seconds
- ¾ second to 1 second
Show answer
Correct answer: ¾ second to 1 second
The average driver needs about ¾ second to 1 second to move a foot to the brake after seeing a hazard.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
At 55 mph, how far does a vehicle travel during the average driver's reaction time?
- 61 feet
- 41 feet
- 81 feet
Show answer
Correct answer: 61 feet
At 55 mph the vehicle keeps moving about 61 feet before the driver's foot even reaches the brake.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
On a dry road with good brakes at 55 mph, roughly how many feet does braking alone take?
- 186 feet
- 216 feet
- 246 feet
Show answer
Correct answer: 216 feet
Braking alone covers roughly 216 feet at 55 mph when the road is dry and the brakes are good.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
At 55 mph, what is the minimum total distance your vehicle travels before it comes to a complete stop?
- 359 feet
- 419 feet
- 479 feet
Show answer
Correct answer: 419 feet
Adding perception, reaction and braking distance, a vehicle at 55 mph travels at least 419 feet before stopping.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
You raise your speed from 20 mph to 40 mph. How does your braking distance change?
- It becomes 2 times longer
- It becomes 4 times longer
- It becomes 8 times longer
Show answer
Correct answer: It becomes 4 times longer
Doubling speed makes braking distance 4 times longer, and the force of an impact is 4 times greater too.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
If you go from 20 mph to 60 mph, how much greater are the impact and the braking distance?
- 3 times greater
- 9 times greater
- 12 times greater
Show answer
Correct answer: 9 times greater
Three times the speed gives 9 times the impact and 9 times the braking distance.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
How does your stopping distance at 60 mph compare with the length of a football field?
- It is longer than a football field
- It is about half a football field
- It is about the same as a football field
Show answer
Correct answer: It is longer than a football field
At 60 mph a vehicle needs more than a football field to stop.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Compared with 20 mph, how much greater are the impact and braking distance at 80 mph?
- 16 times greater
- 8 times greater
- 12 times greater
Show answer
Correct answer: 16 times greater
At 80 mph both the force of impact and the braking distance are 16 times what they are at 20 mph.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
How does an empty truck's stopping distance compare with a loaded one's?
- It is shorter, because the truck is lighter
- It is the same, because brakes work equally
- It is longer, because it has less traction
Show answer
Correct answer: It is longer, because it has less traction
Heavy-vehicle brakes and tires are built to work best fully loaded, so an empty truck has less traction and needs a longer distance to stop.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
What is traction?
- The friction between the tires and the road
- The grip of the brake shoes on the drums
- The weight resting on the drive wheels
Show answer
Correct answer: The friction between the tires and the road
Traction is the friction between tires and road surface. Without it you cannot steer or brake the vehicle.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
A road is wet. What can happen to the distance you need to stop?
- It can double it
- It adds about ten percent
- It can make it five times longer
Show answer
Correct answer: It can double it
Water can double the distance you need, so slow down to keep the same stopping room you have on a dry road.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
By how much should you reduce your speed on a wet road?
- By about one-tenth
- By about one-third
- By about three-quarters
Show answer
Correct answer: By about one-third
On a wet road, cut your speed by about one-third, for example from 55 mph to about 35 mph.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
How much should you reduce your speed on packed snow?
- By about one-quarter
- By half, or more
- By about one-tenth
Show answer
Correct answer: By half, or more
Packed snow gives little traction, so slow down by half or more.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
What is the right response when the road surface is icy?
- Slow to a crawl, then stop when safe
- Slow to half speed and drive on
- Hold your speed and avoid braking
Show answer
Correct answer: Slow to a crawl, then stop when safe
On ice, drive at a crawl and stop as soon as it is safe to do so.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
After ice has melted from open stretches, which parts of the road can stay icy?
- Freshly paved sections
- Shady parts
- Wide straight sections
Show answer
Correct answer: Shady parts
Shaded road sections stay icy and slippery long after sunny, open areas have melted.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
When the temperature falls near freezing, what part of the route ices up before the rest of the road?
- Tunnels
- Bridges
- Hilltops
Show answer
Correct answer: Bridges
Bridges ice over before the road does, so be extra careful near 32 degrees Fahrenheit.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Ice has begun to melt slightly and looks wet. How slippery is it compared with ice that is not wet?
- About equally slippery
- Much more slippery
- Somewhat less slippery
Show answer
Correct answer: Much more slippery
Slight melting puts a film of water on the ice, which makes it far slipperier than ice that stays dry.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
It is freezing outside and the pavement looks wet. What hazard should you suspect?
- Black ice
- Oil leaking from traffic
- Light fog settling on the pavement
Show answer
Correct answer: Black ice
A thin, clear ice layer lets the road show through and looks like water. Suspect it whenever it is freezing and the pavement looks wet.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
How can you check from the cab whether the road may be starting to ice up?
- Feel the mirror, its support or the antenna
- Check whether the tires hum louder on the road
- Watch whether the windshield wipers slow down
Show answer
Correct answer: Feel the mirror, its support or the antenna
Ice on the mirror face, its bracket or the antenna, felt through an open window, suggests the road is starting to ice up.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
2Part 221 questions
-
Why is a road especially slippery just after rain begins?
- Rain washes sand onto the road surface
- Rain softens the paint on the lane lines
- Water mixes with oil left by vehicles
Show answer
Correct answer: Water mixes with oil left by vehicles
Early rain mixes with oil on the road and makes it very slippery. Continued rain washes the oil away.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Your truck is hydroplaning. What should you do to regain control?
- Brake firmly to slow down quickly
- Ease off the gas and push in the clutch
- Steer sharply toward the road shoulder
Show answer
Correct answer: Ease off the gas and push in the clutch
Easing off the accelerator and pushing in the clutch lets the wheels spin freely and slows the truck. Never brake to slow down.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
At what low speed can hydroplaning begin when there is a lot of water on the road?
- As low as 30 mph
- As low as 15 mph
- As low as 45 mph
Show answer
Correct answer: As low as 30 mph
With enough water, tires can lose contact with the road at speeds as low as 30 mph.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Which tire condition makes hydroplaning more likely?
- Tires with low pressure or worn tread
- Tires inflated slightly above the usual pressure
- Tires with new, deep tread
Show answer
Correct answer: Tires with low pressure or worn tread
Low pressure or worn tread makes hydroplaning more likely, because shallow grooves cannot carry water away well.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Which sight on the road tells you that standing water may be present?
- Dust blowing across the lanes
- Faded paint on the lane lines
- Tire splashes from other vehicles
Show answer
Correct answer: Tire splashes from other vehicles
Standing water shows up as clear reflections, splashes from tires and raindrops on the road surface.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
A vehicle takes a curve too fast and its tires lose traction. What happens?
- The engine stalls and the vehicle stops dead
- It goes straight ahead and skids off the road
- The trailer brakes lock up without any braking
Show answer
Correct answer: It goes straight ahead and skids off the road
Too much speed in a curve can make the tires lose traction, so the vehicle goes straight ahead and off the road. The other risk is a rollover.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
A truck with a high center of gravity takes a curve at the posted limit. What is the risk?
- Its brakes may overheat
- Its engine may stall
- It may roll over
Show answer
Correct answer: It may roll over
Tall-centered trucks may tip over even when they stay within the limit shown for the curve.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Why finish slowing before entering a curve instead of braking in it?
- Brake lights are hard to see from behind in a curve
- Brakes use more air when the truck leans over
- Braking in a curve can lock wheels and start a skid
Show answer
Correct answer: Braking in a curve can lock wheels and start a skid
It is easier to lock the wheels while braking in a curve, which can cause a skid, so be at a safe speed first.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
What gear should you be in as you go through a curve?
- A gear that lets you speed up slightly
- Neutral, so the truck can coast
- The highest gear to save the engine
Show answer
Correct answer: A gear that lets you speed up slightly
Being in a gear that lets you accelerate slightly in the curve helps you keep control.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
In fog or rain, within what distance should you always be able to stop?
- Within a distance set by the posted limit
- Within the distance to the next intersection
- Within the distance you can see ahead
Show answer
Correct answer: Within the distance you can see ahead
Slow down whenever conditions shorten how far you can see, so you can always stop within the distance you can see.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
At night you have to use low beams. What should you do with your speed?
- Speed up to clear the dark stretch sooner
- Keep your speed and watch the road edge
- Slow down to match the shorter view
Show answer
Correct answer: Slow down to match the shorter view
Low beams light less road than high beams, so slow down.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Which speed is safest when driving in heavy traffic?
- A little faster than other vehicles
- The speed of the other vehicles
- A little slower than other vehicles
Show answer
Correct answer: The speed of the other vehicles
Vehicles traveling the same way at the same speed rarely collide, provided that speed is legal and safe.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
In many states trucks and buses have lower speed limits than cars. By how much can the limits differ?
- As much as 5 mph
- As much as 15 mph
- As much as 25 mph
Show answer
Correct answer: As much as 15 mph
The truck and bus limit can be as much as 15 mph below the car limit, so take extra care when changing lanes or passing.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Why is driving faster than the flow of traffic usually not worth it?
- It saves little time and adds risk and fatigue
- It saves time but wears out tires faster
- It saves time but burns much more fuel
Show answer
Correct answer: It saves little time and adds risk and fatigue
Speeding past traffic gains almost no time. You must keep passing vehicles, which raises crash risk and tires you.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
A sign on a downgrade shows a Maximum Safe Speed. What does that speed mean for you?
- You may exceed it briefly if you brake early
- Never go faster than the speed shown
- It applies only to cars, not heavy vehicles
Show answer
Correct answer: Never go faster than the speed shown
Never exceed a posted speed limit or a Maximum Safe Speed on a downgrade.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
What is the main tool for controlling speed on a long downgrade?
- Light, steady pressure on the service brake
- Repeated stabs on the parking brake
- The braking effect of the engine
Show answer
Correct answer: The braking effect of the engine
Engine braking should do the main work on downgrades, keeping the brakes in reserve for what traffic needs.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
When is the braking effect of the engine strongest?
- Near the governed rpms in a lower gear
- Near idle speed in the highest gear
- Near idle speed with the clutch pushed in
Show answer
Correct answer: Near the governed rpms in a lower gear
Engine braking is strongest when the engine runs near its governed rpms with the transmission in a lower gear.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
When should you shift to a low gear for a long downgrade?
- After the truck picks up speed on the way down
- Before you start down the grade
- Only when the brakes begin to fade
Show answer
Correct answer: Before you start down the grade
Select a low gear before you begin the descent so the engine can hold your speed and the brakes are saved.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
Which factor causes the most injuries and deaths in roadway work zones?
- Poor lighting at night
- Speeding traffic
- Narrow lanes
Show answer
Correct answer: Speeding traffic
Speeding traffic tops the list in work zones, so obey the posted limit the whole way through.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
What should you do about your speed in a long stretch of road construction?
- Match the speed of the fastest vehicles nearby
- Check your speed only at the work zone entrance
- Check the speedometer so your speed does not creep up
Show answer
Correct answer: Check the speedometer so your speed does not creep up
Long construction sections make speed creep up unnoticed, so keep watching the speedometer.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)
-
A worker is standing near the lane you are driving through in a work zone. What is the right move?
- Slow down even further
- Move over and keep the same speed
- Sound the horn to warn the worker
Show answer
Correct answer: Slow down even further
Cut your speed again when workers are near the road, beyond slowing for weather and road conditions.
Source: CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)