Driving Test Practice
English

Washington, D.C.: Railroad crossings Practice Test

Flashing signals, gates, crossing markings and a vehicle stalled on the tracks.

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

7 questions · About 3 min

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 4 to answer and Enter for the next question

Questions are original and based on the official manual "District of Columbia Driver Manual" (Updated January 2024), District of Columbia Department of Motor Vehicles (DC DMV).

All 7 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. If your vehicle stalls on railroad tracks and a train is coming, what does the manual say to do?

    A car stuck on railroad tracks behind stopped traffic, with the gates down and a train approaching
    • Stay in the vehicle and sound the horn until the train stops
    • Run away from the tracks in the same direction as the train
    • Stay in the vehicle and keep trying to restart the engine
    • Get out and run along the side of the tracks toward the train
    Show answer

    Correct answer: Get out and run along the side of the tracks toward the train

    You get out and run along the side of the tracks toward the train, to avoid being struck by debris from the crash.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 33

    Report a problem with this question (dc-c3-264)

  2. What must you do at a railroad crossing with lowered gates and/or flashing lights?

    A railroad crossing with flashing lights and a lowered gate
    • Slow down and cross if no train is visible
    • Stop
    • Cross only after sounding your horn
    • Stop only if a train is within sight
    Show answer

    Correct answer: Stop

    At a railroad crossing with lowered gates or flashing lights you must stop.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 44

    Report a problem with this question (dc-c5-28)

  3. What do flashing red signals at a railroad crossing warn you of?

    A white RAILROAD CROSSING crossbuck sign with a bell and a pair of red signal lights, one of them lit
    • A train has just passed and the crossing is clear
    • The crossing is closed permanently
    • A school bus is stopped ahead
    • A train is coming
    Show answer

    Correct answer: A train is coming

    Flashing red signals at a crossing, possibly with bells, warn that a train is coming.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 51

    Report a problem with this question (dc-c7-26)

  4. After waiting for a train to go by at a flashing red crossing signal, what should you check?

    The last boxcar of a freight train clears a single-track crossing, gates down and red lights flashing, while a blue car and a white car wait behind the stop line.
    • That another train is not approaching on another track
    • That the train's last car has a red light
    • That the gates have been raised for a full minute
    • That no vehicles are behind you
    Show answer

    Correct answer: That another train is not approaching on another track

    You should stop, wait for the train to pass, and make sure another train is not coming on another track.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 51

    Report a problem with this question (dc-c7-27)

  5. What is important to do when approaching a railroad crossing that has no warning system?

    Top view of a two-lane road crossing two parallel railroad tracks, with a white X-shaped crossbuck sign beside the tracks and a round yellow RR sign on the approach; a blue car drives toward the crossing and no train is in sight.
    • Keep your speed and cross as quickly as you can
    • Sound your horn and drive straight across it
    • Slow down, then look and listen for an oncoming train
    • Follow the vehicle ahead of you without slowing
    Show answer

    Correct answer: Slow down, then look and listen for an oncoming train

    With no flashing lights or gates, slow down, look and listen, and stop before the tracks if a train is coming.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 51

    Report a problem with this question (dc-c7-28)

  6. How fast do trains move compared with how fast they appear to move from a distance?

    A blue car driving toward a rural railroad crossing marked only by RAILROAD CROSSING crossbuck signs, as a freight train sounding its horn approaches from the left
    • Slightly slower than they appear
    • Exactly as fast as they appear
    • Much faster than they appear
    • Faster only at night
    Show answer

    Correct answer: Much faster than they appear

    Trains are always moving much faster than they appear from a distance, so drivers should never try to beat one.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 51

    Report a problem with this question (dc-c7-29)

  7. What does a white “X” and the letters “RR” marked on the road tell you?

    A two-lane road with a double yellow center line leading to railroad tracks: a large X with the letters R R painted in the lane, a white line across the lane before the rails, a crossbuck and a round yellow sign beside the road, and a blue car approaching
    • You are about to cross railroad tracks and should watch for trains
    • A bus-only lane begins just ahead of you on the road
    • A school crossing is located just ahead of you on the road
    • Parking is prohibited on the railroad tracks near the road
    Show answer

    Correct answer: You are about to cross railroad tracks and should watch for trains

    These pavement markings alert you that you are about to cross railroad tracks, where trains cannot stop quickly.

    Source: ⁨District of Columbia Driver Manual (Updated January 2024)⁩, page 51

    Report a problem with this question (dc-c7-30)