Washington, D.C.: Pavement markings — Part 1 Practice Test
Questions in this part include: “According to the manual’s sample question, what is the best way to tell if you are permitted to pass other vehicles?” · “On a two-lane highway, which of these is a place where you must not pass?”
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
Answer to start, or tap Start below:
According to the manual’s sample question, what is the best way to tell if you are permitted to pass other vehicles?
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
- Keyboard: press 1 to 4 to answer and Enter for the next question
Questions are original and based on the official manual "District of Columbia Driver Manual" (Updated January 2024), District of Columbia Department of Motor Vehicles (DC DMV).
All 17 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
According to the manual’s sample question, what is the best way to tell if you are permitted to pass other vehicles?
- See if there are solid or broken lane markings
- See if there is a flashing green light
- See if the road ahead is straight
- See if the vehicle ahead signals that it is OK to pass
Show answer
Correct answer: See if there are solid or broken lane markings
The manual gives the lane markings, solid or broken, as the best way to tell whether passing is permitted.
Source: District of Columbia Driver Manual (Updated January 2024), page 11
-
According to the fog safety tips, white pavement markings denote:
- The left travel edge of the roadway
- The division of opposing traffic
- The right travel edge of the roadway
- The center of a two-way road
Show answer
Correct answer: The right travel edge of the roadway
The manual says white pavement markings denote the right travel edge of the roadway.
Source: District of Columbia Driver Manual (Updated January 2024), page 29
-
According to the fog safety tips, yellow pavement markings are used to divide:
- Traffic moving in the same direction
- Opposing roadway traffic
- Bicycle lanes from travel lanes
- Parking spaces from lanes
Show answer
Correct answer: Opposing roadway traffic
The manual says yellow is used to divide opposing roadway traffic and to indicate the left travel edge of the roadway.
Source: District of Columbia Driver Manual (Updated January 2024), page 29
-
What are rumble strips?
- Painted stripes on the pavement that show where a lane ends
- Raised signs that mark the edge of a bridge
- Short corrugated sections of roadway that alert you with tire noise
- Wide sections of smooth pavement for passing
Show answer
Correct answer: Short corrugated sections of roadway that alert you with tire noise
Driving over rumble strips makes noise and warns you of a hazard.
Source: District of Columbia Driver Manual (Updated January 2024), page 34
-
On a two-lane highway, which of these is a place where you must not pass?
- On a straight stretch with a clear view of the road ahead and no oncoming vehicles
- Where a vehicle ahead is traveling slower than the other traffic on the road
- On a road where the center of the roadway is not marked by any line at all
- Where the solid yellow line is on your side of the center of the roadway
Show answer
Correct answer: Where the solid yellow line is on your side of the center of the roadway
A solid yellow line on your side of the center means passing is not allowed.
Source: District of Columbia Driver Manual (Updated January 2024), page 41
-
Which of these describes a place where passing is not allowed on a two-lane highway?
- Where there are two solid yellow lines
- On a straight road with a clear view ahead
- Where the shoulder is wide enough
- On a road with light traffic
Show answer
Correct answer: Where there are two solid yellow lines
Two solid yellow lines mean you must not pass.
Source: District of Columbia Driver Manual (Updated January 2024), page 41
-
What do red reflectors on the pavement show?
- Areas not to be entered or used
- Parking spaces for persons with disabilities
- The center of a two-way road
- The edge of a bicycle lane
Show answer
Correct answer: Areas not to be entered or used
Red reflectors on the pavement show areas not to be entered or used.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
Who can see the red reflectors on the pavement?
- Only drivers who are traveling at night
- Only traffic going the wrong direction
- Only bicyclists who are in a bike lane
- All drivers, from every direction
Show answer
Correct answer: Only traffic going the wrong direction
Red reflectors are positioned so only traffic flowing in the wrong direction would observe them.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
What do blue pavement markings show?
- Areas that are not to be entered or used
- Bicycle lanes along the roadway
- Zones where no parking is allowed
- Parking spaces for people with disabilities
Show answer
Correct answer: Parking spaces for people with disabilities
Blue markings show parking spaces for persons with disabilities.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
What do yellow center lines mean?
- Two-way traffic in opposite directions
- One-way traffic going in the same direction
- A lane that is reserved for buses only
- The right edge of the pavement on the road
Show answer
Correct answer: Two-way traffic in opposite directions
Yellow center lines separate two-way traffic that flows in opposite directions.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
What do broken yellow center lines mean?
- Passing is never allowed in either direction at all
- Passing is allowed only for drivers in the right lane
- Passing on the left is allowed in either direction if clear
- Passing is allowed only if you use the shoulder
Show answer
Correct answer: Passing on the left is allowed in either direction if clear
Broken yellow center lines allow passing on the left in either direction when the way ahead is clear.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
A broken yellow line lies alongside a solid yellow line. From which side is passing allowed?
- From the side of the solid line
- From both sides
- From the side of the broken line
- From neither side
Show answer
Correct answer: From the side of the broken line
Passing is allowed from the side of the broken line, but not from the side of the solid line.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
Vehicles on the solid yellow line side of one solid and one broken yellow line may cross it only to pass whom?
- Pedestrians, bicyclists, and riders of scooters or skateboards
- Vehicles that are parked along the side of the road ahead
- Any slower motor vehicle that is traveling ahead of you
- Buses that are stopped at a bus stop along the road
Show answer
Correct answer: Pedestrians, bicyclists, and riders of scooters or skateboards
On the solid-line side you may cross only to pass pedestrians, bicyclists, and riders of scooters or skateboards, when the opposite lane is clear and you can pass safely.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
What do double solid yellow lines separate?
- Lanes of traffic going in the same direction
- A bicycle lane from a travel lane
- A special use lane from conventional lanes
- Traffic traveling in two different directions
Show answer
Correct answer: Traffic traveling in two different directions
Double solid yellow lines mark the center of the road and separate traffic traveling in opposite directions.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
Is passing allowed in either direction where there are double solid yellow lines?
- Yes, if the way ahead is clear of traffic
- No, passing is not allowed either way
- Yes, but only from the right-hand lane
- Yes, but only during daylight hours
Show answer
Correct answer: No, passing is not allowed either way
Passing is not allowed in either direction at double solid yellow lines.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
When the opposite lane is clear and you can pass safely, when may you cross double solid yellow lines?
- When making a left turn or passing pedestrians, bicyclists, and riders of scooters or skateboards
- When making a right turn or passing any slower vehicle that is traveling on the road ahead
- When no traffic can be seen in either direction anywhere on the road ahead of you
- When changing over to a lane that has less traffic in it than your current lane has
Show answer
Correct answer: When making a left turn or passing pedestrians, bicyclists, and riders of scooters or skateboards
You may not cross them unless making a left turn or passing pedestrians, bicyclists, and riders of scooters or skateboards, when the opposite lane is clear and you can pass safely.
Source: District of Columbia Driver Manual (Updated January 2024), page 57
-
What do broken white lines separate?
- Traffic traveling in opposite directions
- A turn lane from a travel lane
- Lanes of traffic going in the same direction
- The roadway from the shoulder
Show answer
Correct answer: Lanes of traffic going in the same direction
Broken white lines separate lanes going in the same direction, and you may change lanes with caution.
Source: District of Columbia Driver Manual (Updated January 2024), page 57