Driving Test Practice

Guide, railroad and other signs in Delaware

The Delaware Driver Manual shows or names everything on this page: 16 in all, on pages 75, 78, 83–84, 96, 102, 121.

Independent educational site · not affiliated with any government agency or DMV

Guide and service signs

Railroad crossings

  • RR

    RR

    Round sign black on yellow is used as an advance warning that you are approaching a highway-rail intersection. When you come to this sign, slow down and watch for the highway-rail intersection. Use particular caution at night to avoid driving into the side of a train.

    Manual page 75 · Open this page in the manual (Manual page 75)

  • Railroad Crossbuck

    Railroad Crossbuck

    A white, X-shaped sign or "crossbuck" with Railroad Crossing on it is located at the railroad crossing. This sign has the same meaning as a Yield sign. You must yield to crossing trains.

    Manual page 84 · Open this page in the manual (Manual page 84)

  • 2 TRACKS

    2 TRACKS

    Crossings with more than one train track often will post a sign that shows the number of tracks. These signs warn you that there is more than one track and there may be more than one train crossing. If you come to a railroad crossing without a number-of-tracks sign, it is important that you always check if there is more than one track before crossing.

    Manual page 84 · Open this page in the manual (Manual page 84)

  • Railroad Flashing Lights

    Railroad Flashing Lights

    At some crossings, along with the crossbuck sign, you will see side-by-side lights that will flash when a train is approaching. When the lights are flashing, you must stop.

    Manual page 84 · Open this page in the manual (Manual page 84)

  • Railroad Gate

    Railroad Gate

    At some crossings there is also a crossing gate that will lower when a train is coming. Do not drive around the gate. Some crossings also have a bell that will sound. Do not cross until the bell has stopped.

    Manual page 84 · Open this page in the manual (Manual page 84)

  • Railroad Pavement Marking

    Railroad Pavement Marking

    Many highway-rail intersections have roadway surface or pavement markings in advance of the crossing. These markings usually include an "X" symbol with the letters "RR" and a stop bar.

    Manual page 84 · Open this page in the manual (Manual page 84)

  • Railroad Emergency Phone Sign

    Railroad Emergency Phone Sign

    Every grade crossing has an emergency dispatch number for contacting the railroad to report problems with the crossing, tracks or train travel. The ENS number is typically located on a blue sign on the actual cross buck or it can be found in the vicinity of the crossing. The sign also contains a DOT number that identifies the grade crossing's physical location so emergency crews or railroad personnel can respond.

    Manual page 83 · Open this page in the manual (Manual page 83)

Other signs and symbols

  • Slow-Moving Vehicle Emblem

    Slow-Moving Vehicle Emblem

    A "Slow-Moving Vehicle" emblem-a triangular, fluorescent and reflective orange sign-is sometimes attached to farm tractors and other slow-moving vehicles to warn approaching drivers. When you see this sign, slow down immediately and proceed with caution.

    Manual page 102 · Open this page in the manual (Manual page 102)

  • Emergency Call Sign

    Many roadways have signs that tell you the CB channel or telephone number to call in an emergency.

    Manual page 121 · Open this page in the manual (Manual page 121)