Driving Test Practice
English

Your stateNot chosenChoose it to see the page numbers of your state's own CDL manual.

General Knowledge: Accident procedures and fires

What to do at an accident scene, what causes vehicle fires, and how to prevent and fight them. Split into 2 shorter tests so you're not stuck in one long quiz.

Independent educational site · not affiliated with any government agency or DMV

All 43 Accident procedures and fires questions with answers

Choose a part above to take a practice test, or study every question and answer here.

Show the questions and answersHide the questions
Part 122 questions
  1. Which set lists the three basic steps to take at any accident?

    • Protect the area, notify authorities, care for the injured
    • Find the cause, call your company, move the injured
    • Clear the road, take photos, notify your insurer
    Show answer

    Correct answer: Protect the area, notify authorities, care for the injured

    The three basic steps at any accident are to protect the area, notify the authorities and care for the injured.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-782)

  2. What should you do first when you arrive at an accident scene?

    The road ahead seen through a truck's windshield on a two-lane rural road: two cars have collided and stand across both lanes, and two people stand on the shoulder, one on a phone.
    • Keep another accident from happening at the spot
    • Help the injured people out of their vehicles
    • Find out who caused the accident
    Show answer

    Correct answer: Keep another accident from happening at the spot

    The first priority is to stop a second crash from happening at the same place.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-783)

  3. Your own vehicle is in an accident and can still be driven. What should you try to do with it?

    • Pull it over to the roadside
    • Leave it where it stopped so police can see it
    • Back it up to give other traffic more room
    Show answer

    Correct answer: Pull it over to the roadside

    Moving your vehicle to the side helps prevent another accident and lets traffic keep moving.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-784)

  4. You stop to help at an accident you were not part of. Where should you park?

    The road ahead seen through a truck's windshield on a two-lane rural road: two cars have collided and stand across both lanes, and two people stand on the shoulder, one on a phone.
    • Right beside the crashed vehicles, to light up the scene
    • Away from the accident, so emergency vehicles have room
    • In the lane next to the accident, to block traffic
    Show answer

    Correct answer: Away from the accident, so emergency vehicles have room

    The area right around the accident must stay open for emergency vehicles.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-785)

  5. Which lights should you turn on to help protect an accident area?

    • Your high beams
    • Your cab marker lights only
    • Your flashers
    Show answer

    Correct answer: Your flashers

    Turning on your flashers warns approaching drivers that there is a problem ahead.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-786)

  6. When you set out reflective triangles at an accident, what must you make sure of?

    • They are placed right up against the crashed vehicle
    • They are set out before you turn on your flashers
    • Approaching drivers can see them early enough to stop
    Show answer

    Correct answer: Approaching drivers can see them early enough to stop

    Triangles only protect the scene if approaching drivers see them early enough to avoid the accident.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-787)

  7. You have a cell phone or CB radio at an accident. When should you call for help?

    The road ahead seen through a truck's windshield on a two-lane rural road: two cars have collided and stand across both lanes, and two people stand on the shoulder, one on a phone.
    • Before you get out of your vehicle
    • After you have checked all the injured people
    • Once emergency vehicles are already in sight
    Show answer

    Correct answer: Before you get out of your vehicle

    With a phone or CB, you call for help first, before leaving your vehicle.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-788)

  8. You have no cell phone or CB at an accident. When should you phone the police, or send someone to do it?

    The road ahead seen through a truck's windshield on a two-lane rural road: two cars have collided and stand across both lanes, and two people stand on the shoulder, one on a phone.
    • Immediately, before doing anything else at the scene
    • Once the scene has been made safe for others
    • After all the injured have been taken away
    Show answer

    Correct answer: Once the scene has been made safe for others

    With no phone or CB, make the scene safe first. After that, call the police yourself or ask someone else to call.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-789)

  9. What should you try to determine so you can tell the police?

    • Exactly where you are
    • Which driver was at fault in the accident
    • The names of the other drivers' insurers
    Show answer

    Correct answer: Exactly where you are

    Rescuers need the exact location to reach the scene quickly.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-790)

  10. A qualified person is already helping the injured at an accident. What should you do?

    • Take over the care of the injured yourself
    • Move the injured people away from the road
    • Stay out of the way unless you are asked to help
    Show answer

    Correct answer: Stay out of the way unless you are asked to help

    When a qualified person is helping, you should not interfere unless you are asked to assist.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-791)

  11. No qualified person is at the accident to help the injured. What should you do?

    • Leave the injured alone until police arrive
    • Give the injured whatever help you can
    • Only set out triangles and wait
    Show answer

    Correct answer: Give the injured whatever help you can

    When nobody qualified is helping, you give the injured the best help you are able to.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-792)

  12. When may you move a severely injured person?

    • Whenever the person asks to sit up now
    • Only if fire or traffic makes it necessary
    • As soon as emergency vehicles are called
    Show answer

    Correct answer: Only if fire or traffic makes it necessary

    A severely injured person should stay still unless fire or passing traffic makes moving unavoidable.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-793)

  13. How do you stop heavy bleeding from an injured person?

    • Apply direct pressure to the wound
    • Wrap the whole limb tightly and leave it
    • Wash the wound with clean water
    Show answer

    Correct answer: Apply direct pressure to the wound

    Direct pressure on the wound is the way to stop heavy bleeding.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-794)

  14. What simple step helps an injured person while you wait for help?

    • Give the person something to drink
    • Walk the person around
    • Keep the person warm
    Show answer

    Correct answer: Keep the person warm

    Keeping an injured person warm is one of the simple steps to take when giving assistance.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-795)

  15. Which two things can start a fire after an accident?

    • Spilled fuel and a cold engine
    • Broken glass and loose cargo straps
    • Spilled fuel and improper use of flares
    Show answer

    Correct answer: Spilled fuel and improper use of flares

    After an accident, spilled fuel and flares used the wrong way are fire hazards.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-796)

  16. Which tire problem can cause a vehicle fire?

    • Tires with deep tread
    • Tires of different brands
    • Duals that touch each other
    Show answer

    Correct answer: Duals that touch each other

    Under-inflated tires and dual tires that touch are both causes of vehicle fires.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-797)

  17. What in the electrical system can cause a vehicle fire?

    • Short circuits from damaged wire insulation
    • Headlights left on while parked for hours
    • A fully charged battery in a cold engine
    Show answer

    Correct answer: Short circuits from damaged wire insulation

    Damaged wire insulation and loose connections can cause short circuits, which can start fires.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-798)

  18. During your vehicle inspection, what must you confirm about the fire extinguisher?

    A red fire extinguisher held in its bracket beside the driver's seat of a truck, with its handle, safety pin, hose and a hanging inspection tag.
    • That it holds water only
    • That it is charged
    • That its label shows this year's date
    Show answer

    Correct answer: That it is charged

    As part of fire prevention, make sure the extinguisher is charged and ready to use.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-799)

  19. At every stop during a trip, what should you look for on the tires, wheels and truck body?

    • Signs of wear on the paint
    • Signs of heat
    • Signs of loose license plates
    Show answer

    Correct answer: Signs of heat

    Checking for heat at each stop can reveal a fire danger before it grows.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-800)

  20. Which activities call for correct safety procedures to prevent a fire?

    • Fueling, using the brakes and handling flares
    • Adjusting the seat, using the horn and wipers
    • Setting the radio, dimming lights and shifting gears
    Show answer

    Correct answer: Fueling, using the brakes and handling flares

    Fueling, braking and handling flares can all start a fire, so each must be done by the safe procedure.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-801)

  21. While driving, how can you spot a possible fire starting?

    • Listen for engine noise and watch only the road ahead
    • Check the load once a trip and the gauges at each fuel stop
    • Watch gauges for overheating and use mirrors to look for smoke
    Show answer

    Correct answer: Watch gauges for overheating and use mirrors to look for smoke

    Check gauges often for overheating and use the mirrors to see smoke coming from the tires or the vehicle.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-802)

  22. How much care does fire prevention call for when you handle anything flammable?

    • Only special care when the cargo is placarded
    • No extra care if the container is sealed
    • Normal caution
    Show answer

    Correct answer: Normal caution

    Handle flammable items with normal caution.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-803)

Part 221 questions
  1. When should you read the instructions printed on your fire extinguisher?

    A red fire extinguisher held in its bracket beside the driver's seat of a truck, with its handle, safety pin, hose and a hanging inspection tag.
    • While the fire is burning
    • Before you need to use it
    • After you have used it once
    Show answer

    Correct answer: Before you need to use it

    Some drivers lacking this knowledge have made fires worse, so learn how your extinguisher works ahead of time.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-804)

  2. Your truck is on fire and you must stop. Where should you park it?

    • Close to the trees at the roadside so it is out of traffic
    • In a clear open space away from anything that could burn
    • Beside a nearby building where help can reach you quickly
    Show answer

    Correct answer: In a clear open space away from anything that could burn

    A burning vehicle can ignite whatever is near it, so stop in the open, away from buildings, trees, brush and other vehicles.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-805)

  3. A fire starts on your vehicle while a service station is just ahead. What should you do?

    • Do not pull in; stop somewhere clear of fire hazards
    • Stop there, since the staff will have extinguishers
    • Pull in, but park away from the fuel pumps
    Show answer

    Correct answer: Do not pull in; stop somewhere clear of fire hazards

    Do not pull into a service station with a vehicle fire; park in an open area away from anything that might catch fire.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-806)

  4. After you pull off the road because of a vehicle fire, what should you tell emergency services?

    A tractor-trailer stopped on a gravel pull-off in open country: dark smoke pours from round its closed hood, and the driver stands back from the cab holding a fire extinguisher, a phone at his ear.
    • Your problem and where you are
    • Your cargo and your carrier's name
    • Your license number and destination
    Show answer

    Correct answer: Your problem and where you are

    Emergency services need to know what is wrong and exactly where you are in order to reach you.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-807)

  5. What must you make sure of before you try to put a fire out?

    A tractor-trailer stopped on a gravel pull-off in open country: dark smoke pours from round its closed hood, and the driver stands back from the cab holding a fire extinguisher, a phone at his ear.
    • That every passing driver has been warned
    • That the cargo doors have been opened to check
    • That the fire cannot spread any further
    Show answer

    Correct answer: That the fire cannot spread any further

    Before fighting a fire, first stop it from spreading, for example by turning off the engine or keeping cargo doors shut.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-808)

  6. What should you do with the engine as soon as you can when the fire is in the engine?

    A tractor-trailer stopped on a gravel pull-off in open country: dark smoke pours from round its closed hood, and the driver stands back from the cab holding a fire extinguisher, a phone at his ear.
    • Keep it running to power the water pump
    • Rev it to blow the flames out
    • Shut it off
    Show answer

    Correct answer: Shut it off

    Turning the engine off helps stop the fire from spreading.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-809)

  7. How should you apply an extinguisher to an engine fire?

    • Open the hood a little and spray into the gap
    • Wait for the flames to die down, then spray the engine
    • Spray via louvers, radiator or underside, hood closed
    Show answer

    Correct answer: Spray via louvers, radiator or underside, hood closed

    Avoid opening the hood if you can; shoot foam through the louvers, the radiator or from underneath.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-810)

  8. Your cargo is burning inside a van or box trailer. Why should you keep the doors shut?

    The rear of a van trailer stopped on a gravel pull-off: gray smoke seeps from the edges of its closed rear doors, and the driver stands well back.
    • Opening them would give the fire air so it burns very fast
    • Opening them would let the cargo shift and fall out
    • Opening them would let the smoke blind passing drivers
    Show answer

    Correct answer: Opening them would give the fire air so it burns very fast

    Fresh air feeds a fire. Keeping the doors closed, especially with hazardous materials aboard, limits the oxygen it gets.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-811)

  9. How close should you stand to a fire while you use the extinguisher?

    • As far away as you can while still using it
    • As near as you can, to make sure the spray reaches
    • About one arm's length from the flames
    Show answer

    Correct answer: As far away as you can while still using it

    Staying as far from the fire as possible keeps you away from heat and flames.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-812)

  10. Where should you aim the extinguisher spray?

    • Into the tallest flames above it
    • At the smoke rising above
    • Down at the base of the blaze
    Show answer

    Correct answer: Down at the base of the blaze

    The agent must reach what is actually burning, which is at the base, not the flames above it.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-813)

  11. Which kinds of fire is a B:C extinguisher designed for?

    • Wood, paper and cloth fires only
    • Electrical fires and burning liquids
    • Burning tires and wood fires only
    Show answer

    Correct answer: Electrical fires and burning liquids

    A B:C extinguisher works on electrical fires and burning liquids; the A:B:C type also handles wood, paper and cloth.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-814)

  12. What does an A:B:C extinguisher handle that a B:C type does not?

    • Wood, paper and cloth fires
    • Electrical equipment fires
    • Burning gasoline
    Show answer

    Correct answer: Wood, paper and cloth fires

    The A:B:C type covers electrical fires and burning liquids like the B:C type, and also wood, paper and cloth.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-815)

  13. For which kind of fire is water an acceptable choice?

    • A fire in wood, paper or cloth
    • A fire in electrical wiring
    • A fire in spilled gasoline
    Show answer

    Correct answer: A fire in wood, paper or cloth

    Fires in ordinary materials like wood, paper and cloth may be fought with water; electrical and gasoline fires may not.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-816)

  14. Why should you avoid putting water on a gasoline fire?

    • It makes the fuel burn hotter and longer
    • It will spread the flames
    • It turns the fuel into a poisonous gas
    Show answer

    Correct answer: It will spread the flames

    Water will spread the flames of a gasoline fire, and on an electrical fire it can cause shock.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-817)

  15. What does a burning tire need in order to be put out?

    • To be smothered with a small dose of dry chemical
    • To be left alone until it burns itself out
    • To be cooled, which may take lots of water
    Show answer

    Correct answer: To be cooled, which may take lots of water

    A tire fire must be cooled down, and a large amount of water may be needed.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-818)

  16. You do not know which extinguisher suits a fire, and hazardous materials are involved. What should you do?

    • Try the largest extinguisher you have
    • Wait for the firefighters
    • Use water first and see what happens
    Show answer

    Correct answer: Wait for the firefighters

    The wrong agent can make a fire worse, so when unsure, especially with hazardous materials, leave it to firefighters.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-819)

  17. Where should you stand relative to the wind when fighting a fire?

    • Downwind, so the smoke blows away from the road
    • Wherever you are closest to the fire
    • Upwind, so the wind helps carry the spray to the fire
    Show answer

    Correct answer: Upwind, so the wind helps carry the spray to the fire

    Standing upwind lets the wind carry the extinguishing agent to the fire.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-820)

  18. The smoke and flames have disappeared. What should you remember?

    • The fire can still restart, so keep going until it is cooled
    • The fire is out for good and you can leave
    • Only a cargo fire can restart after the flames stop
    Show answer

    Correct answer: The fire can still restart, so keep going until it is cooled

    Keep working until whatever was burning has cooled, because a fire with no visible smoke or flame can restart.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-821)

  19. How are gasoline, oil and grease fires put out?

    • Soaking them with plenty of water until cool
    • Opening the area up so fresh air cools it
    • Smothering or cooling, with CO2 or dry chemicals
    Show answer

    Correct answer: Smothering or cooling, with CO2 or dry chemicals

    Gasoline, oil and grease fires are fought by smothering, cooling or shielding from heat, with carbon dioxide or dry chemicals.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-822)

  20. What kind of agent should you use on a fire in electrical equipment?

    • A water-based agent that cools the fire quickly
    • Non-conducting one, like carbon dioxide or dry chemicals
    • Any agent, as long as you use a large amount
    Show answer

    Correct answer: Non-conducting one, like carbon dioxide or dry chemicals

    Electrical fires need a non-conducting agent. Water is not to be used on them.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-823)

  21. What is needed to put out a fire in combustible metals?

    • A large amount of plain water
    • Carbon dioxide from an ordinary extinguisher
    • Specialized extinguishing powders
    Show answer

    Correct answer: Specialized extinguishing powders

    Combustible metal fires call for specialized extinguishing powders.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s2-824)