Traffic signals in West Virginia
The West Virginia Driver's Licensing Handbook shows or names everything on this page: 13 in all, on pages 39–40.
Independent educational site · not affiliated with any government agency or DMV
Circular Green (GO)
Drivers facing this signal may enter the intersection and go straight through, turn right, or left, unless, other traffic control devices (signs or pavement markings) prohibit certain movements. All turns must be made in accordance with accepted right-of-way rules. A driver who is facing a circular green indication and wishes to turn left must yield to oncoming vehicles.
Manual page 39 · Open this page in the manual (Manual page 39)
Green Arrow (Left Turn)
A green arrow may be shown alone or with other indications. Drivers facing the signal may enter the intersection to make the movement shown by the arrow. When the green arrow is shown in a left-turn signal, it usually means that opposing traffic is stopped.
Manual page 39 · Open this page in the manual (Manual page 39)
Steady Circular Yellow
This means that the green light is ending and will change to red. You should only drive through a yellow light if the vehicle clearance is within the intersection.
Manual page 39 · Open this page in the manual (Manual page 39)
Yellow Arrow (Left Turn)
This means that the green arrow is ending and will change to red.
Manual page 39 · Open this page in the manual (Manual page 39)
Steady Circular Red (STOP)
Traffic facing a steady circular red signal must stop unless making a movement permitted by a green arrow. The driver must remain stopped until allowed to proceed by another indication. The only exception is to make a permitted turn on red. A driver may turn right on red at the intersection of two-way streets, or may turn left on red from a one-way street to another one-way street. These turns may be made after yielding to all other traffic and pedestrians, and if no signs are posted to prohibit them.
Manual page 39 · Open this page in the manual (Manual page 39)
Steady Red Arrow (Left Turn)
Come to a complete stop before reaching the intersection, stop line or cross walk for the direction indicated by the arrow. Remain stopped as long as the signal is red.
Manual page 39 · Open this page in the manual (Manual page 39)
Flashing Red Light
Come to a complete stop and yield to all other traffic and pedestrians. A circular flashing red is the same as a stop sign; that is, drivers must come to a complete stop and yield to all other traffic and pedestrians.
Manual page 40 · Open this page in the manual (Manual page 40)
Flashing Yellow Light
Proceed through the intersection with caution. Drivers facing a circular flashing yellow light may proceed through the intersection with caution.
Manual page 40 · Open this page in the manual (Manual page 40)
Green Downward Arrow (Lane Control)
Traffic may use the lane under the arrow.
Manual page 40 · Open this page in the manual (Manual page 40)
Yellow X (Lane Control)
The lane is about to be closed or its direction is about to reverse. Move out of it as soon as you can.
Manual page 40 · Open this page in the manual (Manual page 40)
Red X (Lane Control)
The lane is closed or being used by opposing traffic. Do not use this lane.
Manual page 40 · Open this page in the manual (Manual page 40)
Hand Symbol (DON’T WALK)
when these appear pedestrians are not to cross the crosswalk.
Manual page 40 · Open this page in the manual (Manual page 40)
Walking Person (WALK)
when these appear pedestrians are safe to cross the street inside the crosswalk lines.
Manual page 40 · Open this page in the manual (Manual page 40)