Passenger: On the road with passengers
Supervising riders, stops and disruptive riders, common bus accidents, curves, railroad crossings and drawbridges, the after-trip inspection, prohibited practices and brake-door interlocks. Split into 2 shorter tests so you're not stuck in one long quiz.
Independent educational site · not affiliated with any government agency or DMV
Choose a part
On the road with passengers — Part 1
Questions in this part include: “On a charter trip, when is the best time to tell riders about the carrier's comfort and safety rules?”
On the road with passengers — Part 2
Questions in this part include: “A railroad crossing has a traffic signal that is showing green. What must the bus driver do?”
Questions are written in our own words from the CDL manual; they are not the real test's questions. With your state chosen, every answer gives its page in your state's CDL manual. Without a state, answers cite the CDL manual, national model as printed by New Jersey (July 2017).
All 38 On the road with passengers questions with answers
Choose a part above to take a practice test, or study every question and answer here.
Show the questions and answersHide the questions
1Part 119 questions
-
On a charter trip, when is the best time to tell riders about the carrier's comfort and safety rules?
- When a rider first breaks a rule
- Right when the trip begins
- At the first rest stop on the route
Show answer
Correct answer: Right when the trip begins
Telling riders the rules at the beginning helps prevent trouble later in the trip.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
Besides the road around the bus, what else should a bus driver keep watching while driving?
- The inside of the bus and its riders
- Only the mirrors on the right side
- The fare box and the ticket machine
Show answer
Correct answer: The inside of the bus and its riders
A driver must also look over the inside of the bus, so rule breakers or riders with arms and heads out of windows are noticed early.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
While driving, what may a driver have to remind riders about?
- Paying the fare again at each stop
- Rules, and keeping arms and heads inside
- Moving to the back at every stop
Show answer
Correct answer: Rules, and keeping arms and heads inside
Riders who lean out of windows can be hurt, so the driver calls out the rule when it is broken.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
What should a driver tell riders as they get ready to leave the bus?
- To leave by the rear door only
- To stay seated until the doors open fully
- To watch where they step
Show answer
Correct answer: To watch where they step
Riders can stumble while getting off, so the driver reminds them to be careful with each step.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
Riders have just boarded and are still walking in the aisle. What should the driver do before moving the bus?
- Pull out slowly while they walk
- Let them find a seat or hold on first
- Honk once so they know to hurry
Show answer
Correct answer: Let them find a seat or hold on first
Riders can stumble when the bus starts, so the driver waits until they are seated or steady.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
Why should a bus driver start and stop as smoothly as possible?
- To save fuel on city routes
- To keep riders from being hurt
- To keep the brake lining cool
Show answer
Correct answer: To keep riders from being hurt
Sudden starts and stops can throw riders off balance, so smooth driving protects them from injury.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A rider is drunk and causing problems. Where should the driver let this person off?
- At once, at the nearest spot where the bus can pull over
- On a quiet side road, away from the other riders
- At a safe place, such as the next stop or a lit area with people
Show answer
Correct answer: At a safe place, such as the next stop or a lit area with people
The driver is responsible for the safety of the disruptive rider too, so the rider must not be left in an unsafe place.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A bus approaches an intersection where a stop sign controls the cross traffic. What should the driver do?
- Stay careful, since crashes are common there
- Keep normal speed, the cross traffic must stop
- Rely on the stop sign to hold the cross traffic
Show answer
Correct answer: Stay careful, since crashes are common there
Bus crashes often happen at intersections, so caution is needed even when the other traffic has a stop sign.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
What should a driver watch for around a bus stop to avoid scraping off the mirrors?
- Low road signs on the left
- Fire hydrants near the curb
- Poles and tree limbs
Show answer
Correct answer: Poles and tree limbs
The bus needs more clearance than a car, and objects such as poles and tree limbs by the stop can hit the mirrors.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
When should a bus pull away from a stop into moving traffic?
- As soon as the turn signal has been switched on
- When the closest vehicle looks like it is slowing
- After a gap big enough for the bus has opened
Show answer
Correct answer: After a gap big enough for the bus has opened
The driver needs to know how much room the bus needs to speed up and merge, and leaves only when that gap is there.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A bus driver signals to leave a stop and merge into traffic. What must the driver not take for granted?
- That the bus will reach traffic speed in time
- That other drivers will brake to make room
- That the bus stop sign is visible to traffic
Show answer
Correct answer: That other drivers will brake to make room
Other drivers may not slow down for a signaling bus, so the driver must find a real gap in traffic.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
What is behind the deadly bus crashes that happen on curves?
- Tires worn on the inside edge of the tread
- Too much speed, often on a slippery road
- A load placed too far toward the rear
Show answer
Correct answer: Too much speed, often on a slippery road
Going too fast for the curve is the cause, and it is most dangerous when rain or snow makes the road slippery.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
On a banked curve with a posted speed limit, what is true for many buses, even in good weather?
- The posted speed is always safe for a bus
- The posted speed may be too fast for the bus
- The bus may drive ten miles over the posted speed
Show answer
Correct answer: The posted speed may be too fast for the bus
The posted speed is set with cars in mind, and a tall, heavy bus can need a lower speed to stay safe.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A bus takes a curve too fast. What can happen when the road has good grip?
- The bus can roll over
- The bus can slide off the curve
- The bus can stall in the curve
Show answer
Correct answer: The bus can roll over
Too much speed on a grippy road can tip the bus over, while too much speed on a slippery road can make it slide off.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
On a banked curve, the body of the bus leans toward the outside of the turn. What does this tell the driver?
- The speed is too high
- The tires are low on air
- The load is evenly spread
Show answer
Correct answer: The speed is too high
Leaning outward in a banked curve is a warning that the bus is going too fast for the curve.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
How far before a railroad crossing must a bus stop when a stop is required?
- Between 15 and 50 feet
- Between 5 and 10 feet
- Between 60 and 100 feet
Show answer
Correct answer: Between 15 and 50 feet
The bus must stop in a zone starting 15 feet and ending 50 feet before the tracks.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
At a railroad crossing stop, when should a bus driver open the forward door?
- When it helps to see or hear a train
- Every time, to let fresh air in
- Only after the train has passed
Show answer
Correct answer: When it helps to see or hear a train
Opening the door can help the driver see or hear a train coming, so it is done when it makes that easier.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A train has just passed the crossing where the bus is stopped. What must the driver do before crossing?
- Cross at once, since the danger has gone
- Wait for the gates to lift, then cross without looking
- Check that no train is coming on another track
Show answer
Correct answer: Check that no train is coming on another track
Another train may be coming from the other direction on a different track, so the driver checks before crossing.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A bus with a manual transmission is on a railroad crossing. What must the driver avoid?
- Driving over the tracks slowly
- Shifting gears on the tracks
- Looking both ways while crossing
Show answer
Correct answer: Shifting gears on the tracks
A driver of a bus with a manual transmission must never change gears while the bus is on the tracks.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
2Part 219 questions
-
A railroad crossing has a traffic signal that is showing green. What must the bus driver do?
- Slow down and check, no stop is required
- Come to a full stop, then go on
- Keep the same speed, since the signal is green
Show answer
Correct answer: Slow down and check, no stop is required
With a green signal the driver does not need to stop, but must still slow down and look for other vehicles.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
At which kind of railroad crossing is a bus not required to stop, though it must slow down and look?
- One marked exempt or abandoned
- One with a single track
- One in a town with fewer riders aboard
Show answer
Correct answer: One marked exempt or abandoned
Crossings marked as exempt or abandoned do not call for a stop, but the driver still slows down and checks for vehicles.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A drawbridge has no signal light and no attendant. What is the minimum distance from the draw at which the bus must stop?
- 15 feet
- 25 feet
- 50 feet
Show answer
Correct answer: 50 feet
At such a drawbridge the bus stops at least 50 feet before the movable part of the bridge.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
After stopping at a drawbridge with no signal or attendant, what must the driver confirm before going across?
- That the bridge is free of other buses
- That the horn is working properly
- That the draw is fully closed
Show answer
Correct answer: That the draw is fully closed
The driver must see that the movable section is completely closed before driving onto it.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
When does a bus driver not have to stop at a drawbridge, but still slow down and make sure it is safe?
- When no other vehicles are in sight on the road
- When an attendant controls traffic whenever it opens
- When the bridge is more than a mile long
Show answer
Correct answer: When an attendant controls traffic whenever it opens
A bridge with an attendant or traffic officer controlling traffic, or a green light, does not need a stop, only a slow and careful approach.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
When should a bus driver inspect the bus after the trip?
- At the end of every shift
- Once at the end of each week
- Only when a defect was noticed
Show answer
Correct answer: At the end of every shift
An after-trip inspection is done each shift, so problems are found before the bus is used again.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A driver works for an interstate carrier. What must be filled out for each bus driven?
- A written inspection report
- A list of the riders carried
- A record of the fuel bought
Show answer
Correct answer: A written inspection report
Interstate carriers require a written inspection report for every bus the driver operates.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
Which defects must an interstate driver's inspection report list?
- Any that could affect safety or cause a breakdown
- Only those that need a mechanic at once
- Only those that riders have complained about
Show answer
Correct answer: Any that could affect safety or cause a breakdown
The report names each bus and lists every defect that could harm safety or lead to a breakdown.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
What should the inspection report show when the driver finds nothing wrong with the bus?
- Nothing, because it is left blank
- A statement that no defects were found
- A request for the mechanic to look it over anyway
Show answer
Correct answer: A statement that no defects were found
The report should clearly state that there are no defects, rather than being left empty.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
Why should a driver report rider damage to seats or emergency exits at the end of the shift?
- So repairs can be made before the bus runs again
- So the damaged rider can be found
- So the next driver can skip the inspection
Show answer
Correct answer: So repairs can be made before the bus runs again
Reporting the damage promptly gives mechanics time to fix it before the bus goes back on the road.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
What two items should a mass transit driver make sure work properly during the after-trip inspection?
- Rider signals and brake-door interlocks
- The radio and the heater controls
- The fare machine and the destination sign
Show answer
Correct answer: Rider signals and brake-door interlocks
Mass transit buses have rider signals and brake-door interlocks that must be checked at the end of the shift.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A bus needs fuel. When is it acceptable to fuel it with riders on board?
- Whenever the riders agree to it
- Only when it is absolutely necessary
- Any time the engine has been shut off
Show answer
Correct answer: Only when it is absolutely necessary
Fueling with riders aboard is to be avoided and is done only when there is no other choice.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
Where must a driver never refuel a bus that has riders aboard?
- On a busy street corner
- Beside a low curb
- Inside a closed building
Show answer
Correct answer: Inside a closed building
Refueling inside an enclosed building with riders on the bus is never allowed.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
What is a bus driver not supposed to do while the bus is moving?
- Check the mirrors
- Chat with riders
- Watch the interior
Show answer
Correct answer: Chat with riders
Conversations and other distractions take the driver's attention off the road, so they are prohibited while driving.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
A bus breaks down with riders aboard. When may it be towed or pushed with them still inside?
- Whenever the riders are all seated
- Only when leaving the bus would be unsafe
- Whenever the tow truck driver agrees
Show answer
Correct answer: Only when leaving the bus would be unsafe
Riders should leave a disabled bus before it is moved, unless getting off would put them in danger.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
If a disabled bus must be moved with riders on board, how far should it be towed or pushed?
- To the nearest safe place to let riders off
- To the next scheduled stop on the route
- To the garage where it is serviced
Show answer
Correct answer: To the nearest safe place to let riders off
The move is kept as short as possible, ending at the closest safe place where riders can get off.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
On a transit coach with a brake-door interlock, what happens when the rear door opens?
- The brakes are applied and the throttle stays at idle
- The parking brake is set and the engine shuts off
- The brakes stay free and the throttle is locked open
Show answer
Correct answer: The brakes are applied and the throttle stays at idle
With the rear door open, the interlock holds the bus with the brakes and keeps the throttle at idle.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
When does a brake-door interlock let go of the brakes and throttle?
- When the driver sets the parking brake
- When the rear door is closed
- When the front door is opened
Show answer
Correct answer: When the rear door is closed
The system releases as soon as the rear door is shut.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)
-
How should a driver treat the brake-door interlock when leaving the bus parked?
- Still set the parking brake, never rely on the interlock
- Rely on the interlock instead of the parking brake
- Leave the rear door open to keep the brakes applied
Show answer
Correct answer: Still set the parking brake, never rely on the interlock
The interlock is an added safety feature only and is never a replacement for the parking brake.
Source: CDL manual, national model as printed by New Jersey, Section 4 (July 2017)