Driving Test Practice
English

Wyoming: Railroad crossings Practice Test

Crossbucks, flashing lights and gates, multiple tracks, stalled vehicles and the Emergency Notification Sign.

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

17 questions · About 7 min

Answer to start, or tap Start below:

Instead of a round sign, what may be painted on the pavement before a railroad crossing?

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 4 to answer and Enter for the next question

Questions are original and based on the official manual "Rules of the Road: State of Wyoming Driver License Manual" (2021 (August 2021)), Wyoming Department of Transportation (WYDOT), Driver Services.

All 17 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. What do railroad advance warning signs advise you to do?

    A two-lane road crosses one railroad track. A white X-shaped sign lettered RAILROAD CROSSING and a round yellow sign with an X and two Rs stand beside it; a blue car drives toward the tracks.
    • Slow down, look and listen, and be ready to stop if a train comes
    • Stop completely and wait for a flagger to wave you across
    • Speed up to cross before a train arrives
    • Stay in your lane and sound your horn while crossing
    Show answer

    Correct answer: Slow down, look and listen, and be ready to stop if a train comes

    Advance warning signs tell drivers to slow down, look and listen for a train, and be prepared to stop if one is approaching.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-25)

  2. The pavement markings at a railroad crossing consist of an R-X-R followed by what?

    A blue car approaches a large white X with an R on each side (R X R), painted across its lane between two white lines on a two-lane road.
    • A set of lowering gates
    • A flashing light over the lane
    • A stop line closer to the tracks
    • A warning sign mounted on a post
    Show answer

    Correct answer: A stop line closer to the tracks

    The R-X-R pavement marking is followed by a stop line that is closer to the tracks.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-26)

  3. Where must you stay while waiting for a train to pass at a crossing that has a stop line painted on the pavement?

    A two-lane road with a double yellow center line crossing a single railroad track; a blue car in the right lane with a white stop line ahead of it and a white X-and-R pavement marking in the lane between the car and the line; white X-shaped crossbucks on posts at the track on both sides of the road and a round yellow sign with an X and two R letters beside the right lane.
    • Between the stop line and the tracks
    • Behind the stop line
    • Beside the crossing in the oncoming lane
    • On the shoulder past the tracks
    Show answer

    Correct answer: Behind the stop line

    The manual says to stay behind the stop line while waiting for a train to pass.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-27)

  4. A crossbuck sign at a railroad crossing is what kind of sign?

    A white X-shaped sign with a black border, one blade lettered RAIL ROAD and the other CROSS ING, on a grey metal post.
    • A stop sign
    • A speed limit sign
    • A guide sign
    • A yield sign
    Show answer

    Correct answer: A yield sign

    Crossbuck signs are yield signs.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-28)

  5. At a crossbuck sign, a train is approaching. What are you legally required to do?

    A blue car driving toward a rural railroad crossing marked only by RAILROAD CROSSING crossbuck signs, as a freight train sounding its horn approaches from the left
    • Yield the right of way to the train
    • Cross ahead of it if you have enough speed
    • Stop only if the train is within sight
    • Sound your horn and then cross
    Show answer

    Correct answer: Yield the right of way to the train

    You are legally required to yield the right of way to trains at a crossbuck sign, and to stop if a train approaches.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-29)

  6. When a crossing has more than one set of tracks, what will be below the crossbuck?

    Top view of a two-lane road crossing two parallel railroad tracks, with a white X-shaped crossbuck sign beside the tracks and a round yellow RR sign on the approach; a blue car drives toward the crossing and no train is in sight.
    • A sign showing the speed of the next train
    • A sign showing the time of the next train
    • A sign showing how many tracks there are
    • A sign showing the speed limit for the crossing
    Show answer

    Correct answer: A sign showing how many tracks there are

    A sign below the crossbuck tells drivers how many sets of tracks there are.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-30)

  7. What do flashing red lights at a railroad crossing tell you?

    Top view of a two-lane road crossing railroad tracks. Crossbuck signs with two red lights stand on both sides of the road, and both pairs of lights are lit. No gate lies across the road and no train is in view. A blue car drives toward a white line before the tracks.
    • Slow down and cross if no train is visible
    • Stop, because a train is approaching
    • Proceed with caution and sound your horn
    • Prepare to stop only if you see the train
    Show answer

    Correct answer: Stop, because a train is approaching

    Flashing red lights mean a train is approaching, so you must stop and yield the right of way to it.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-31)

  8. At a crossing with flashing red lights and more than one track, what must you make sure of before crossing?

    A railroad crossing signal: a white X-shaped crossbuck lettered RAIL ROAD and CROSS ING with a 3 TRACKS plate below it, a bell on top and two round red lights, one of them lit.
    • That only the nearest track is clear
    • That the gates on the far side are up
    • That the lights have flashed for a minute
    • That all tracks are clear
    Show answer

    Correct answer: That all tracks are clear

    With more than one track, you must make sure all tracks are clear before you cross.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-32)

  9. At a railroad crossing with flashing lights and gates, when must you stop?

    Top view of a two-lane road crossing railroad tracks. Crossbuck signs with dark, unlit lights stand on both sides of the road and the gate arms point upward. No train is in view. A blue car drives toward a white line before the tracks.
    • When the lights start to flash, before the gate area
    • Only after the gate starts to lower across your lane
    • Only when the gate is fully down across the road
    • Only when you can see the train coming
    Show answer

    Correct answer: When the lights start to flash, before the gate area

    You must stop when the lights begin to flash and before the area where the gate will lower across your lane.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-33)

  10. At a railroad crossing with gates, how long must you remain stopped?

    Top view of a two-lane road crossing a railroad track: the red lamps on both crossing signals are flashing and the striped gate arms are lowered across the lanes; there is no train and no vehicle.
    • Until the gates go up, even if the lights still flash
    • Until the lights stop, even if the gate is still down
    • Until the gates go up and the lights have stopped flashing
    • Until you can see that no train is coming
    Show answer

    Correct answer: Until the gates go up and the lights have stopped flashing

    You stay stopped until the gates are up and the lights have stopped flashing, and then proceed when it is safe.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 66 · Open this page in the manual (Manual page 66)

    Report a problem with this question (wy-c5-34)

  11. How should you approach every highway-rail intersection?

    Top view of a two-lane road crossing a railroad track: crossing signals with RAILROAD CROSSING crossbucks stand on both sides, their red lamps dark and their gate arms raised; a blue car approaches the crossing and no train is in sight.
    • Always expect a train
    • Expect a train only where there are gates
    • Expect a train only at night
    • Expect a train only when you hear a horn
    Show answer

    Correct answer: Always expect a train

    The manual says to always expect a train at every highway-rail intersection.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 85 · Open this page in the manual (Manual page 85)

    Report a problem with this question (wy-c7-89)

  12. When may you drive onto a highway-rail intersection?

    Top view of a two-lane road crossing a railroad track: crossing signals with RAILROAD CROSSING crossbucks stand on both sides, their red lamps dark and their gate arms raised; a blue car approaches the crossing and no train is in sight.
    • As soon as the train's horn has stopped sounding
    • As soon as you see no train
    • Only when you can clear the tracks without stopping
    • When the car ahead stops on the tracks
    Show answer

    Correct answer: Only when you can clear the tracks without stopping

    Never drive onto a highway-rail intersection unless you are sure you can clear the tracks on the other side without stopping.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 85 · Open this page in the manual (Manual page 85)

    Report a problem with this question (wy-c7-90)

  13. What should you do at a multiple-track crossing before you cross?

    Top view of a two-lane road crossing two railroad tracks, with a RAILROAD CROSSING crossbuck sign and a 2 TRACKS plate beside the tracks, a round yellow RR sign on the approach and your blue car approaching; no train is in sight.
    • Cross right after the first train passes by you
    • Look and listen for another train from either direction
    • Stop on the tracks to look
    • Speed up to clear the tracks
    Show answer

    Correct answer: Look and listen for another train from either direction

    Stay alert, especially at a multiple-track crossing, because another train may be coming from either direction.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 85 · Open this page in the manual (Manual page 85)

    Report a problem with this question (wy-c7-91)

  14. If your vehicle stalls on a highway-rail intersection, what should you do?

    A red car stopped on railroad tracks with its hazard lights flashing, the crossing lights dark and the gates up
    • Stay inside and keep trying to start the engine
    • Push it off the track with passengers inside
    • Wait inside for a train to stop
    • Get everyone out and far from the tracks at once
    Show answer

    Correct answer: Get everyone out and far from the tracks at once

    Get everyone out and far away from the tracks right away, and call 911.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 85 · Open this page in the manual (Manual page 85)

    Report a problem with this question (wy-c7-92)

  15. What should you NEVER do about a train approaching a highway-rail intersection?

    A blue car driving toward a rural railroad crossing marked only by RAILROAD CROSSING crossbuck signs, as a freight train sounding its horn approaches from the left
    • Race it to the intersection
    • Look and listen for it
    • Stop and wait for it
    • Expect it at every crossing
    Show answer

    Correct answer: Race it to the intersection

    Racing a train is foolish: if you lose, you and your passengers may never have another chance.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 85 · Open this page in the manual (Manual page 85)

    Report a problem with this question (wy-c7-94)

  16. Instead of a round sign, what may be painted on the pavement before a railroad crossing?

    • A yield triangle with the word TRAIN
    • A double yellow line with arrows
    • A stop line or an X with the letters RR
    • A white crosswalk with an arrow
    Show answer

    Correct answer: A stop line or an X with the letters RR

    A stop line or an X with the letters RR may be painted on the pavement before a crossing to warn of it.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 96 · Open this page in the manual (Manual page 96)

    Report a problem with this question (wy-c9-14)

  17. What is the Emergency Notification Sign (ENS) at a railroad crossing for?

    A blue rectangular sign with a white border, white lettering and a telephone symbol, mounted on a post below a white railroad crossbuck.
    • Emergencies that would require stopping train traffic
    • Reporting potholes in the road near the crossing
    • Telling drivers how fast the trains are traveling
    • Requesting a tow truck for a vehicle near the crossing
    Show answer

    Correct answer: Emergencies that would require stopping train traffic

    The ENS is for emergencies that would require stopping trains because of an obstruction on the tracks or a problem at the crossing, such as lights or gates not working.

    Source: ⁨Rules of the Road: State of Wyoming Driver License Manual (2021 (August 2021))⁩, page 96 · Open this page in the manual (Manual page 96)

    Report a problem with this question (wy-c9-17)