Driving Test Practice
English

South Carolina: Pavement markings Practice Test

Yellow and white center and lane lines, when passing is allowed, and stop lines and crosswalks.

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

7 questions · About 3 min

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 4 to answer and Enter for the next question

Questions are original and based on the official manual "South Carolina Driver's Manual" (2026 (posted April 2026)), South Carolina Department of Motor Vehicles.

All 7 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. What are pavement markings?

    • Lines, arrows, words, or symbols painted on the roadway to give directions or warnings
    • Signs posted at the roadside to tell drivers about laws, hazards, and services
    • Lights and signals placed over lanes to control traffic at intersections
    • Cones, barrels, and tubes placed in lanes to guide traffic around hazards
    Show answer

    Correct answer: Lines, arrows, words, or symbols painted on the roadway to give directions or warnings

    Pavement markings are lines, arrows, words, or symbols painted on the roadway to give directions or warnings.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-12 · Open this page in the manual (Manual page 6-12)

    Report a problem with this question (sc-c6-265)

  2. Which of these are pavement markings used for?

    • Telling you the posted speed limit on that road
    • Showing the distance to the next exit on the highway
    • Showing where you must stop for signs or traffic signals
    • Giving the name of the road that you are traveling on
    Show answer

    Correct answer: Showing where you must stop for signs or traffic signals

    Pavement markings show where you must stop for signs or traffic signals, along with dividing lanes and showing where you may pass.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-12 · Open this page in the manual (Manual page 6-12)

    Report a problem with this question (sc-c6-266)

  3. A two-direction roadway has a single dashed yellow line down the center. What does the marking mean?

    Two-lane road with a broken yellow center line and white edge lines: a gray truck ahead and a red car behind it, both in the right lane.
    • Passing is prohibited in both directions
    • Passing is permitted
    • The road is one-way
    • The center lane is reserved for left turns
    Show answer

    Correct answer: Passing is permitted

    A dashed yellow center line on a two-direction roadway means passing is permitted.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-13 · Open this page in the manual (Manual page 6-13)

    Report a problem with this question (sc-c6-267)

  4. On a two-direction roadway, a solid yellow line runs beside a dashed yellow line. When is passing permitted?

    A straight two-lane road seen from above, with a solid yellow line beside a broken yellow line down the middle and no vehicles.
    • When the solid line is on your side
    • In neither direction
    • In both directions
    • When the dashed line is on your side
    Show answer

    Correct answer: When the dashed line is on your side

    With a solid and a dashed yellow line, passing is permitted only for the driver whose side has the dashed line.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-13 · Open this page in the manual (Manual page 6-13)

    Report a problem with this question (sc-c6-268)

  5. On a two-direction roadway, two solid yellow lines run side by side down the center. What does the marking mean?

    A double solid yellow center line on a two-lane road, with a truck ahead of your car and another car in the other lane
    • Passing is permitted in both directions
    • Passing is permitted on one side only
    • The center lane is shared for left turns
    • Passing is prohibited in both directions
    Show answer

    Correct answer: Passing is prohibited in both directions

    Double solid yellow center lines mean passing is prohibited in both directions.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-13 · Open this page in the manual (Manual page 6-13)

    Report a problem with this question (sc-c6-269)

  6. A one-direction roadway has a dashed white line between its lanes. What does the marking mean?

    Broken white lane lines on a three-lane road with two cars
    • Passing is prohibited
    • Passing is permitted
    • Traffic may travel in both directions
    • Drivers must stay in the right lane
    Show answer

    Correct answer: Passing is permitted

    A dashed white line between lanes on a one-direction roadway means passing is permitted.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-14 · Open this page in the manual (Manual page 6-14)

    Report a problem with this question (sc-c6-270)

  7. If there is a stop line before the crosswalk, which must you obey first?

    A red car driving toward a white line across its lane, with a striped crosswalk beyond it and a street with a double yellow line at the top.
    • The crosswalk
    • The nearest sign
    • Neither of them
    • The stop line
    Show answer

    Correct answer: The stop line

    If a stop line comes before the crosswalk, the stop line must be obeyed first.

    Source: ⁨South Carolina Driver's Manual (2026 (posted April 2026))⁩, page 6-15 · Open this page in the manual (Manual page 6-15)

    Report a problem with this question (sc-c6-275)