Traffic signals in Rhode Island
The Rhode Island Driver’s Manual shows or names everything on this page: 17 in all, on pages 41–42.
Independent educational site · not affiliated with any government agency or DMV
SOLID RED LIGHT
Complete stop. The signal stopped until signal turns green. Steady Red Light: Stop before reaching the crosswalk and wait until the light is green (unless another light such as a green arrow directs you otherwise).
Manual page 42
SOLID YELLOW LIGHT
Clear the intersection. Prepare for the red light. Steady Yellow Light: A yellow light tells a driver that a red light is next. Slow down and proceed with caution if a stop cannot be made safely. A motorist must proceed with caution through the yellow light so as to clear the intersection as required by law.
Manual page 42
SOLID GREEN LIGHT
Go, if clear, after yielding or stopping for vehicles or pedestrians. Steady Green Light: You may proceed with caution to avoid colliding with another vehicle or pedestrian.
Manual page 42
RED, YELLOW and GREEN ARROWS
RED, YELLOW and GREEN ARROWS tell. motorist to stop/go in the direction the arrow is pointing.
Manual page 42
GREEN ARROW
GREEN ARROWS tell motorists they may proceed in the direction of the arrow (also known as the “Protected Turn Situation”). Traffic Light with a Green Arrow: In cities, intersections often have traffic lights that show a green arrow along with the red light. Vehicles at the light may proceed into the intersection and turn in the direction indicated by the green arrow. This is known as a protected turn lane.
Manual page 42
Red Arrow
Traffic Light with a Red Arrow: Red arrows are usually used on left/right-hand turns. When a red arrow is displayed, you must stop and may not proceed in the direction of the arrow. When the red arrow goes out, it will be followed either by a green arrow, a steady green light, or a flashing yellow arrow.
Manual page 41
Flashing Yellow Arrow
Traffic Light with a Flashing Yellow Arrow: Flashing yellow arrows are sometimes used for left-hand turns. When a flashing yellow arrow is displayed, you may proceed with turning in the direction of the arrow only after yielding to oncoming traffic and pedestrians. Oncoming traffic has a steady green light.
Manual page 41
FLASHING RED SIGNAL
A flashing red signal is treated as a stop sign. Flashing Red Light: When nearing a flashing red traffic light, you must make a full stop and yield the right-of-way to all vehicles on your right and left. Treat the flashing red signal as a stop sign.
Manual page 42
FLASHING YELLOW SIGNAL
A flashing yellow will tell motorists to proceed with caution. Flashing Yellow Light: Slow down, cover the brake, then proceed with caution.
Manual page 42
HORIZONTAL TRAFFIC SIGNAL
The manual does not state it
Manual page 42
Stale Green Light
Stale green light is a light that has been green for a while.
Manual page 42
Fresh Green Light
Fresh green light is a light that has just turned green.
Manual page 42
HAWK (Pedestrian Hybrid Beacon)
HAWK: High-Intensity Activated Crosswalk is used to let pedestrians safely cross a street.
Manual page 42
DONT WALK (Pedestrian Signal)
Always follow ‘Walk’ and ‘Don’t Walk’ signals.
Manual page 42
Raised Hand (Pedestrian Signal)
The manual does not state it
Manual page 42
WALK (Pedestrian Signal)
If facing a yellow or red light, cross only if a ‘Walk’ signal is showing. Always follow ‘Walk’ and ‘Don’t Walk’ signals.
Manual page 42
Walking Person (Pedestrian Signal)
The manual does not state it
Manual page 42