Driving Test Practice
English

Your stateNot chosenChoose it to see the page numbers of your state's own CDL manual.

School Bus: Cheat Sheet

The facts of this test you most need, grouped by topic, each with its page in the manual. Print it or keep it on your phone.

Independent educational site · not affiliated with any government agency or DMV

Driving Test Practiceofficialdrivingtest.com

100% free — no email, no paywall. Print it, save it, or share it with anyone studying for the same test.

Danger zones and mirrors

  • The area ahead of the bumper where children are at risk can reach 30 feet.
  • Along both sides and behind the rear bumper, the danger zone extends 10 feet.
  • Cars go by on the left side of the bus, so that side is always a danger area for children.
  • Flat mirrors should be set to show the road about 200 feet back, which is roughly four bus lengths.
  • A convex mirror gives a wide view, but people and objects in it look different in size and distance than they really are.
  • Crossover mirrors show the danger zone just in front of the bumper, which you cannot see by looking straight ahead, as well as the front corners and service door area.
  • The mirror should show every student on the bus, even the heads of those seated just behind the driver.

Loading and unloading students

  • Getting on and off the bus is more deadly than riding in it, so a driver's actions at every point of loading and unloading are critical.
  • The amber lights warn other drivers early, so they go on at least 200 feet, or roughly 5 to 10 seconds, before the stop unless state law says otherwise.
  • The right turn signal should be on about 100 to 300 feet, or 3 to 5 seconds, before the bus pulls over, so following drivers know the bus is about to stop.
  • Stopping at least 10 feet back makes the students walk to the bus, which lets the driver see how they move.
  • At every stop the bus is secured by putting the transmission in Park (or in Neutral when there is no Park position) and setting the parking brake.
  • The red lights go on once other traffic is a safe distance from the bus, and the stop arm must be extended to warn drivers to stop.
  • Counting the students at the stop and making sure that same number boards shows whether anyone has been left behind.
  • After the door is closed, the driver puts the bus in gear, then releases the parking brake and continues with the remaining steps.
  • A bus that has passed a student's stop is not backed up to it. The driver follows the local procedures for handling the missed stop.
  • A walk through the empty bus finds students who are asleep or hiding, and belongings they left behind.
  • A student who bends down or goes back for an object can vanish from the driver's view. Students should leave it, step out of the danger zones, and signal the driver.
  • Clothes, bags or even body parts can snag in the handrail or door as a student steps out, so the driver should closely watch every student exiting and confirm each is in a safe location before moving.

Evacuation and railroad crossings

  • Control and safety are usually best when students stay on the bus, unless staying exposes them to unnecessary risk or injury.
  • Fire or the threat of fire always requires getting students off the bus.
  • A bus stalled on or next to a railroad crossing is one of the cases where evacuation is required.
  • A safe place is 100 feet or more from the road, so students are not struck by debris if another vehicle hits the bus.
  • The safe place lies off the road on the side toward oncoming traffic.
  • Students should be taken as far from the tracks as possible, heading in the direction an oncoming train is coming from.
  • With a hazardous spill, students go upwind at least 300 feet from the bus.
  • Moving a student with a possible neck or spinal injury can cause more harm, so it is done only when that student's life is in immediate danger.
  • Switching on the hazard lights about 200 feet ahead lets other drivers know what the bus is about to do.
  • The bus stops at least 15 feet but not more than 50 feet from the closest rail, in the spot that gives the best view of the tracks.
  • The bus stops once, before the first set. When no train is coming on any track, it goes across all of them without stopping again.
  • Once the bus has started across and the gate comes down, the driver keeps going and drives through the gate, even if it breaks.
  • As a rule of thumb, the space past the tracks should equal the bus length plus another 15 feet, so the whole bus can clear the rails if it must stop.

Students, ABS and special safety

  • A serious problem needs the bus stopped in a safe spot off the road, like a parking lot or driveway, so the driver can talk to the students without added danger.
  • A student may be let off only at school or at the assigned stop, never somewhere else along the way.
  • Requests for help are made the way state or local procedures say.
  • The Department of Transportation requires ABS on air-braked vehicles built on or after March 1, 1998.
  • ABS prevents wheel lock-up, which keeps steering possible while braking. It does not promise a shorter stop.
  • With ABS the driver keeps steady pressure in a hard stop and does not pump.
  • Backing is dangerous and raises the risk of a collision, so a bus must never back while students are outside it.
  • The back of a school bus can swing out as much as three feet in a turn.