Driving Test Practice
English

Your stateNot chosenChoose it to see the page numbers of your state's own CDL manual.

General Knowledge: CDL classes, endorsements and tests — Part 3

Questions in this part include: “Which restriction code shows that a driver has been issued a medical variance?” · “When can an applicant take the CDL skills test?”

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

42 questions · About 17 min

Answer to start, or tap Start below:

Which restriction code shows that a driver has been issued a medical variance?

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 3 to answer and Enter for the next question

Questions are written in our own words from the CDL manual; they are not the real test's questions. With your state chosen, every answer gives its page in your state's CDL manual. Without a state, answers cite the CDL manual, national model as printed by New Jersey (July 2017).

All 21 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. Which restriction code shows that a driver has been issued a medical variance?

    • M
    • K
    • V
    Show answer

    Correct answer: V

    The V code tells that there is medical variance information on the CDLIS driver record.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-043)

  2. A CLP holder with a tank endorsement may not operate which tank vehicle?

    • One that is empty and has a trainer aboard
    • One that held only water and is now empty
    • One that held hazmat and was never purged
    Show answer

    Correct answer: One that held hazmat and was never purged

    A tank vehicle that once held hazardous materials is off limits until it has been purged of all residue.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-044)

  3. An applicant takes the skills test in a vehicle with air over hydraulic brakes. What is the driver restricted from operating?

    • Any CMV with air brakes at all
    • A CMV with hydraulic brakes
    • A CMV with fully air-operated brakes
    Show answer

    Correct answer: A CMV with fully air-operated brakes

    This test setup leads to the Z restriction, which bars CMVs whose brakes work fully on the air brake principle.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-045)

  4. What must an applicant pass to get a CDL or CLP?

    • A skills test in a truck only
    • A written knowledge test only
    • Knowledge and skills tests
    Show answer

    Correct answer: Knowledge and skills tests

    Both knowledge tests and skills tests must be passed to get a CDL or CLP.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-046)

  5. Which approach does best at teaching the many skills needed to drive a commercial vehicle safely?

    • Formal training in a class or program
    • Reading this manual several times
    • Practicing alone in a company truck
    Show answer

    Correct answer: Formal training in a class or program

    Formal training is the best way to learn these skills. The manual helps with the tests but does not replace training.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-047)

  6. What decides whether a bus falls in Class A, B or C?

    • Its length and its number of axles
    • Its engine size and the fuel it uses
    • Its GVWR and whether it is a combination
    Show answer

    Correct answer: Its GVWR and whether it is a combination

    A bus's class depends on its weight rating and on whether it is a combination vehicle.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-048)

  7. What decides how many knowledge tests a CDL applicant must take?

    • The applicant's age and years of driving
    • The number of axles on the test vehicle
    • The license class and the endorsements wanted
    Show answer

    Correct answer: The license class and the endorsements wanted

    The number of knowledge tests depends on the class of license and on which endorsements the applicant needs.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-049)

  8. Which knowledge test must every CDL applicant take?

    • The general knowledge test
    • The air brakes test
    • The doubles/triples test
    Show answer

    Correct answer: The general knowledge test

    The general knowledge test is the one test that every applicant takes, whatever the class or endorsements.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-050)

  9. Who takes the passenger transport knowledge test?

    • All bus driver applicants
    • All applicants for combination vehicles
    • All applicants who haul liquid in tanks
    Show answer

    Correct answer: All bus driver applicants

    Every applicant who wants to drive a bus takes the passenger transport test.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-051)

  10. Which vehicles make the air brakes knowledge test necessary?

    • Only vehicles whose brakes work fully on air
    • Only vehicles pulling a trailer with air brakes
    • Any vehicle with air brakes or air over hydraulic
    Show answer

    Correct answer: Any vehicle with air brakes or air over hydraulic

    A driver whose vehicle has air brakes must take the air brakes test, and air over hydraulic brakes count too.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-052)

  11. What must a driver pass, besides the knowledge test, to get the hazardous materials endorsement?

    • A background check run by the TSA
    • A second road test in a placarded truck
    • A review of the driver's medical variance
    Show answer

    Correct answer: A background check run by the TSA

    The hazardous materials endorsement also requires passing a background check by the Transportation Security Administration.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-053)

  12. When can an applicant take the CDL skills test?

    • Before taking any knowledge test
    • Only after a year of holding a permit
    • After passing the required knowledge tests
    Show answer

    Correct answer: After passing the required knowledge tests

    The skills test comes after the applicant has passed the knowledge tests that are required, once the applicant is eligible.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-054)

  13. What are the three segments of the CDL skills test?

    • An inspection, backing practice, and a written exam
    • Control exercises, a road drive, and a log review
    • An inspection, control exercises, and a road drive
    Show answer

    Correct answer: An inspection, control exercises, and a road drive

    The skills test has a vehicle inspection, a basic vehicle control segment and an on-road driving segment.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-055)

  14. What must an applicant do before starting the next segment of the skills test?

    • Wait a full day between segments
    • Let the examiner grade all segments together
    • Pass the segment just taken
    Show answer

    Correct answer: Pass the segment just taken

    The segments are taken in a fixed order, and each one must be passed before the next begins.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-056)

  15. In which vehicle must an applicant take the skills tests?

    • Any truck the examiner chooses to provide
    • The smallest vehicle in the applicant's class
    • The vehicle type the applicant wants a license for
    Show answer

    Correct answer: The vehicle type the applicant wants a license for

    The skills tests are taken in the same type of vehicle the applicant wants to be licensed to drive.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-057)

  16. Which feature rules a vehicle out of the CDL skills test?

    • A vehicle with a manual transmission
    • A vehicle with dual rear wheels
    • A vehicle with marked or labeled parts
    Show answer

    Correct answer: A vehicle with marked or labeled parts

    A vehicle whose components are marked or labeled is not allowed for the skills test.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-058)

  17. During the vehicle inspection segment, what must the applicant do for each item checked?

    • Point to it, name it, and say what is checked and why
    • Fill out a written checklist for the examiner
    • Name it and then repair any fault found
    Show answer

    Correct answer: Point to it, name it, and say what is checked and why

    The applicant shows the part, names it, and tells the examiner what would be checked and the reason.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-059)

  18. What does the basic vehicle control segment ask the applicant to do?

    • Move forward, move backward, and turn in a set area
    • Drive on highways and through intersections
    • Name and explain each part of the vehicle
    Show answer

    Correct answer: Move forward, move backward, and turn in a set area

    In basic vehicle control the applicant drives forward, backs up and turns inside a defined area.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-060)

  19. In the basic vehicle control segment, how does the applicant learn how to do each exercise?

    • The examiner explains each one
    • A diagram is posted at the site
    • A handout is given the day before
    Show answer

    Correct answer: The examiner explains each one

    The examiner tells the applicant how each control exercise is to be done.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-061)

  20. Which of these is among the situations the on-road test may include?

    • Pre-trip checks of lights and tires
    • Backing into a marked area
    • Turns, crossings, curves, and grades
    Show answer

    Correct answer: Turns, crossings, curves, and grades

    The on-road test uses a variety of traffic situations, such as turns, intersections, railroad crossings, curves and grades.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-062)

  21. Who tells the applicant where to drive during the on-road test?

    • A printed route the applicant plans
    • A GPS route set before the test
    • The examiner
    Show answer

    Correct answer: The examiner

    During the on-road test the examiner gives the applicant the directions about where to drive.

    Source: ⁨CDL manual, national model as printed by New Jersey, Sections 1 to 3 (July 2017)⁩

    Report a problem with this question (cdl-gk-s1-063)