Arizona: Freeway driving — Part 1 Practice Test
Questions in this part include: “While entering a freeway, what must you not do?” · “On highways with three or more travel lanes in the same direction, what is the right lane typically used for?”
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
Questions are original and based on the official manual "Arizona Driver License Manual and Customer Service Guide" (Revised March 2026), Arizona Department of Transportation Motor Vehicle Division (ADOT MVD).
All 21 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
What are freeways and interstate highways designed to do?
- Carry only through traffic and no local drivers
- Handle higher speed traffic safely
- Separate commercial vehicles from passenger vehicles
- Replace local streets for short trips
Show answer
Correct answer: Handle higher speed traffic safely
Freeways and interstate highways are designed to handle higher speed traffic safely.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
What must traffic entering a freeway do?
- Take the right-of-way over traffic already on the freeway
- Stop at the end of the ramp before merging
- Take turns with each vehicle on the freeway
- Yield right-of-way to traffic already on the freeway
Show answer
Correct answer: Yield right-of-way to traffic already on the freeway
Traffic entering a freeway must yield right-of-way to traffic already on the freeway.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
Who is responsible for safely merging when entering a freeway?
- The drivers entering the freeway
- The drivers already on the freeway
- The drivers in the left lane
- The drivers who are traveling fastest
Show answer
Correct answer: The drivers entering the freeway
The manual says drivers entering the freeway are responsible for safely merging.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
When entering a freeway, you should match the speed of your vehicle to the speed of what?
- Traffic in the left lane of the freeway
- The slowest vehicle on the ramp
- Traffic in the right lane of the freeway
- The speed shown for the ramp only
Show answer
Correct answer: Traffic in the right lane of the freeway
When entering a freeway you match your speed to the speed of traffic in the right lane.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
Before you merge onto a freeway, what should you do?
- Sound your horn and merge at the first gap
- Stop at the end of the ramp and wait for a clear lane
- Signal and check the traffic around you
- Move to the left lane before the ramp ends
Show answer
Correct answer: Signal and check the traffic around you
The manual says to signal before you merge, check traffic around you, and merge carefully when clear.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
While entering a freeway, what must you not do?
- Cross a solid line or drive through a gore area
- Match the speed of traffic in the right lane
- Signal before you merge
- Check the traffic around you
Show answer
Correct answer: Cross a solid line or drive through a gore area
When entering a freeway you must not cross a solid line or drive through a gore area.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
What do most freeways have to assist you in exiting?
- Acceleration lanes
- Reversible lanes
- Crossover lanes
- Deceleration lanes
Show answer
Correct answer: Deceleration lanes
The manual says most freeways have deceleration lanes to assist you in your exit.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
What must you be sure to do before exiting a freeway?
- Move to the left lane
- Signal
- Turn on your hazard flashers
- Sound your horn
Show answer
Correct answer: Signal
The manual says to be sure to signal before exiting the freeway.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
How should you slow down when exiting a freeway?
- Use proper braking to allow for a smooth exit
- Brake hard as soon as you reach the ramp
- Coast without braking until the ramp ends
- Stop at the start of the exit ramp and check traffic
Show answer
Correct answer: Use proper braking to allow for a smooth exit
The manual says to use proper braking to allow for a smooth exit.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
When exiting a freeway in heavy traffic, what should you maintain between your vehicle and the vehicle ahead?
- As little space as possible so that no one cuts in
- Exactly one car length
- Adequate space (a space cushion)
- A gap equal to the distance behind you
Show answer
Correct answer: Adequate space (a space cushion)
In heavy traffic you maintain adequate space (space cushion) between your vehicle and the vehicle ahead when exiting.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
What is a divided highway or freeway?
- One with a single roadway shared by traffic in both directions
- One with separate roadways for traffic in opposite directions
- One with a painted line separating two directions of traffic
- One with a center lane used by both directions for left turns
Show answer
Correct answer: One with separate roadways for traffic in opposite directions
A divided highway/freeway has separate roadways for traffic in opposite directions, often with multiple lanes on each side.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 31
-
What does it mean when a highway is “controlled access”?
- It has traffic signals at each place where it crosses another road
- It can be entered from any side street
- It allows entry only to vehicles with a permit
- It has no traffic signals, and you enter and exit using ramps
Show answer
Correct answer: It has no traffic signals, and you enter and exit using ramps
Controlled access means the highway has no signals and you enter and exit it using ramps.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
When should you be in the proper lane to safely enter or exit a highway?
- Just as you reach the ramp
- At the last moment, after checking your mirrors
- Only after you have signaled and slowed to a stop
- Well in advance
Show answer
Correct answer: Well in advance
The manual says to make sure you are in the proper lane well in advance.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
As you approach and enter a highway travel lane, what should you do with your speed?
- Keep it at the ramp speed until a gap opens
- Increase it to match that of vehicles already on the road
- Slow down below the speed of vehicles on the road
- Stay slow until you are fully in the lane
Show answer
Correct answer: Increase it to match that of vehicles already on the road
The manual says to increase your speed to match that of vehicles already on the road.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
What should you do if you miss your exit on a highway?
- Stop on the shoulder and back up carefully to the exit you missed
- Make a U-turn across the median at the first open gap in traffic
- Get off at the next exit and look for signs to rejoin the road in the other direction
- Slow down in the right lane and back up when traffic is clear behind you
Show answer
Correct answer: Get off at the next exit and look for signs to rejoin the road in the other direction
If you miss your exit you do not stop or back up, but get off at the next exit and look for signs to rejoin the road in the other direction.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
On a roadway with two or more lanes, which part of the roadway should you drive on, unless you are passing or signs indicate otherwise?
- The right half
- The left half
- The center of the roadway
- Any lane that is not busy
Show answer
Correct answer: The right half
On all roadways with two or more lanes you drive on the right half except when passing or when signs indicate otherwise.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
On highways with three or more travel lanes in the same direction, what is the right lane typically used for?
- Passing slower traffic
- Entering and exiting
- Carpool vehicles only
- Slow-moving trucks only
Show answer
Correct answer: Entering and exiting
The manual says the right lane is typically used for entering and exiting.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
On a multi-lane highway, what should you be alert for?
- Vehicles that will never change lanes in front of you
- Drivers who always signal long before they change lanes
- Vehicles that stop in the travel lane to wait for an exit
- Other vehicles attempting to merge into your lane
Show answer
Correct answer: Other vehicles attempting to merge into your lane
The manual says to be alert for other vehicles attempting to merge into your lane.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
Which speed must you not exceed on a highway?
- The posted speed limits
- The speed of the vehicles around you
- The speed of traffic in the right lane
- The speed of the vehicle ahead of you
Show answer
Correct answer: The posted speed limits
The manual says not to exceed the posted speed limits.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
What does the law say about a gore area?
- It is against the law only to park in it, but you may drive over it
- It may be used to pass slower traffic when the road is clear
- It is against the law to drive over or park in any part of it
- It may be used for a brief stop to signal that you need help
Show answer
Correct answer: It is against the law to drive over or park in any part of it
It is against the law to drive over or park in any part of a gore area.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32
-
What is a gore area?
- The space between a through roadway and an entrance or exit ramp
- The shoulder to the right of an exit ramp on the freeway
- The median between the opposite roadways of a freeway
- The lane that runs beside the through roadway to the ramp
Show answer
Correct answer: The space between a through roadway and an entrance or exit ramp
A gore area is the space between a through roadway and an entrance or exit ramp.
Source: Arizona Driver License Manual and Customer Service Guide (Revised March 2026), page 32