Driving Test Practice
English

Utah: Pavement markings Practice Test

Yellow and white lines, passing zones, crosswalks and stop lines, and express and carpool lane markings.

Independent educational site · not affiliated with any government agency or DMV

Start the test

Ready? Test yourself

11 questions · About 4 min

  • Instant feedback with an explanation
  • Every answer cites its source in the manual
  • Your best score is saved on this device
  • Keyboard: press 1 to 4 to answer and Enter for the next question

Questions are original and based on the official manual "Utah Driver Handbook" (2026 edition (new 2026 laws effective May 6, 2026)), Utah Department of Public Safety, Driver License Division.

All 11 questions in this practice test

Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.

Show the questions and answersHide the questions
  1. What does it mean to maintain lane integrity?

    • Change lanes often to keep traffic moving along smoothly
    • Drive on the painted line between two lanes to stay centered
    • Stay in the left lane on multi-lane roads at all times
    • Stay within designated lanes and not drive over curbs or sidewalks
    Show answer

    Correct answer: Stay within designated lanes and not drive over curbs or sidewalks

    Maintaining lane integrity means staying in your designated lane and keeping off curbs and sidewalks.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 31 · Open this page in the manual (Manual page 31)

    Report a problem with this question (ut-c8-15)

  2. When may you straddle or drive over a painted lane marking?

    Broken white lane lines on a three-lane road with two cars
    • Only to make a legal and safe maneuver
    • Whenever the road is empty
    • When driving slowly on a residential road
    • When you are about to turn within the next block
    Show answer

    Correct answer: Only to make a legal and safe maneuver

    You must not straddle or drive over a painted lane marking unless it is to make a legal and safe maneuver.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 31 · Open this page in the manual (Manual page 31)

    Report a problem with this question (ut-c8-16)

  3. What indicates some no-parking zones?

    • Yellow center lines
    • White edge lines
    • A painted stop line
    • Colored curb markings
    Show answer

    Correct answer: Colored curb markings

    Colored curb markings indicate some no-parking zones.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 33 · Open this page in the manual (Manual page 33)

    Report a problem with this question (ut-c8-55)

  4. What does the handbook say about crossing a double white line along an express lane?

    Overhead view of a freeway with a double white line beside the far-left lane, which has a large white diamond painted on it, and cars in the other lanes.
    • It is illegal
    • It is allowed when passing
    • It is allowed if you signal first
    • It is allowed when traffic is stopped
    Show answer

    Correct answer: It is illegal

    Crossing a double white line is illegal.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 40 · Open this page in the manual (Manual page 40)

    Report a problem with this question (ut-c9-17)

  5. Which is one purpose of pavement markings?

    • They tell you the speed limit of each lane
    • They show where parking is free of charge
    • They tell you how far the next exit is
    • They show where to stop at signs and signals
    Show answer

    Correct answer: They show where to stop at signs and signals

    Markings divide lanes, show where to pass, mark turn lanes and crosswalks, and show where to stop for signs or signals.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 43 · Open this page in the manual (Manual page 43)

    Report a problem with this question (ut-c9-68)

  6. On a two-direction roadway, a broken yellow line down the center means what?

    • Passing is prohibited in both directions
    • Passing is prohibited in one direction
    • Passing is permitted
    • Passing is permitted only for trucks
    Show answer

    Correct answer: Passing is permitted

    A dashed yellow center line on a two-direction roadway means passing is permitted.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 43 · Open this page in the manual (Manual page 43)

    Report a problem with this question (ut-c9-69)

  7. A two-direction road has a solid yellow line next to a dashed yellow line. When may you pass?

    Top view of a two-lane road whose center marking is a solid yellow line beside a broken yellow line, with a red car going one way and a white car the other.
    • When the dashed line is on your side
    • When the solid line is on your side
    • Never, passing is prohibited in both directions
    • In both directions at any time
    Show answer

    Correct answer: When the dashed line is on your side

    Passing is permitted only for the driver whose side has the dashed line.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 43 · Open this page in the manual (Manual page 43)

    Report a problem with this question (ut-c9-70)

  8. A two-direction road is marked with only a solid yellow center line and no dashed line. What does it mean?

    • Passing is permitted in both directions
    • Passing is permitted in one direction only
    • Passing is permitted when the road is clear
    • Passing is prohibited in both directions
    Show answer

    Correct answer: Passing is prohibited in both directions

    A solid yellow center line with no dashed line means passing is prohibited in both directions.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 43 · Open this page in the manual (Manual page 43)

    Report a problem with this question (ut-c9-71)

  9. On a one-direction roadway, a broken white line between lanes means what?

    Top view of a straight city street with three lanes divided by broken white lines, where a red car, the blue car, a white SUV and a grey car all face the same way.
    • Passing is prohibited
    • Passing is permitted
    • Lane changes are prohibited
    • The lanes may be crossed only at night
    Show answer

    Correct answer: Passing is permitted

    A dashed white line between lanes of a one-direction roadway means passing is permitted.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 43 · Open this page in the manual (Manual page 43)

    Report a problem with this question (ut-c9-72)

  10. How are dedicated bicycle lanes marked?

    • With solid yellow lines
    • With broken white lines
    • With double yellow lines
    • With solid white lines
    Show answer

    Correct answer: With solid white lines

    Dedicated bicycle lanes are marked with solid white lines.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 74 · Open this page in the manual (Manual page 74)

    Report a problem with this question (ut-c14-8)

  11. Which markings may be painted on the pavement in front of a railroad crossing?

    • A yield line, a diamond, and the word “TRAIN”
    • Two solid white lines and an arrow
    • A crosswalk and the letters “RX”
    • A stop line, an “X”, and the letters “RR”
    Show answer

    Correct answer: A stop line, an “X”, and the letters “RR”

    Pavement in front of a crossing may carry a stop line, an X, and the letters RR, warning you of the crossing ahead.

    Source: ⁨Utah Driver Handbook (2026 edition (new 2026 laws effective May 6, 2026))⁩, page 87 · Open this page in the manual (Manual page 87)

    Report a problem with this question (ut-c14-420)