Oklahoma: Traffic signals Practice Test
Red, yellow and green lights, arrows, flashing signals, turns on red, pedestrian signals and lane control signals.
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
- Keyboard: press 1 to 4 to answer and Enter for the next question
Questions are original and based on the official manual "Oklahoma Driver Manual" (2025 (updated November 24, 2025)), Service Oklahoma.
All 22 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
How do traffic signals remove the guesswork about who goes next at an intersection?
- By granting the right-of-way in each direction
- By giving priority to the busiest road
- By letting the first driver to arrive go first
- By giving the right-of-way to the largest vehicle
Show answer
Correct answer: By granting the right-of-way in each direction
Traffic signals grant the right-of-way in each direction at intersections.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
A traffic officer is directing traffic at an intersection that has a traffic signal. Which do you obey?
- The traffic signal unless it is red
- Whichever one lets you go first
- The traffic officer at all times
- The signal on the road with more traffic
Show answer
Correct answer: The traffic officer at all times
The manual says you must obey the officer at all times when an officer is directing traffic.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
As you approach an intersection, how should you adjust your speed?
- So that you reach the intersection before the light changes
- So that you can slow down or stop if the light changes
- So that you match the speed of the car ahead
- So that you can accelerate through a yellow light
Show answer
Correct answer: So that you can slow down or stop if the light changes
The manual says to adjust speed so you can slow or stop if the light changes.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
You have a green light, but yielding the right-of-way would prevent a collision. What should you do?
- Go ahead, because you have the right-of-way
- Sound your horn and keep going
- Speed up to clear the intersection
- Yield, even if the other driver is wrong
Show answer
Correct answer: Yield, even if the other driver is wrong
Safety comes first: drivers should yield if it prevents a collision, even when the other person is wrong.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
Color-blind people can tell a signal’s color by its position. Which color is on top?
- Red
- Yellow
- Green
- White
Show answer
Correct answer: Red
Color-blind people know that red is on top, yellow in the middle and green on the bottom.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
What should you be sure of before you start through an intersection on a green light?
- That the light has just turned green
- That no vehicle is stopped behind you
- That the intersection is clear
- That the cross street has a yellow light
Show answer
Correct answer: That the intersection is clear
On green, drivers must be sure the intersection is clear and watch for drivers racing to beat a red light.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
What does a steady yellow light mean?
- The light is about to turn green, so you should get ready to go
- The light is about to turn red, so stop if you can do so safely
- Speed up to get through before it turns red
- Stop only if other vehicles are waiting
Show answer
Correct answer: The light is about to turn red, so stop if you can do so safely
A steady yellow warns that red is coming, and drivers must stop if they can stop safely before the crosswalk.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
What should you do as you approach a steady yellow light?
- Speed up slightly so you can beat the changing light
- Honk to warn cross traffic
- Change lanes before the intersection
- Adjust your speed so you can come to a smooth stop if needed
Show answer
Correct answer: Adjust your speed so you can come to a smooth stop if needed
The manual tells drivers to adjust speed for a smooth stop and not to speed up to beat the light.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
Where must you stop for a red light?
- Before entering the crosswalk or intersection
- Inside the crosswalk
- After you have entered the intersection
- At the far side of the intersection
Show answer
Correct answer: Before entering the crosswalk or intersection
A red light requires a complete stop before the crosswalk or intersection.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
A flashing red light means the same as which of these?
- A stop sign
- A yield sign
- A flashing yellow light
- A green light
Show answer
Correct answer: A stop sign
A flashing red light is treated like a stop sign, and you may go when it is safe to cross.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
Where is a flashing red light used?
- At intersections where all traffic must stop for pedestrians first
- At intersections under construction
- At dangerous intersections where the crossing traffic may or may not stop
- At highway entrance ramps
Show answer
Correct answer: At dangerous intersections where the crossing traffic may or may not stop
Flashing red lights are used at dangerous intersections where crossing traffic may or may not stop.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
What should you do at a flashing yellow light?
- Come to a complete stop and wait until the light changes to green before going
- Slow down, look in both directions and drive slowly and carefully through the intersection
- Stop completely, then go when it is safe
- Speed up to clear the intersection
Show answer
Correct answer: Slow down, look in both directions and drive slowly and carefully through the intersection
A flashing yellow means caution: slow down, look both ways and be prepared to stop.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
At a flashing yellow left-turn arrow, who has the right-of-way?
- The driver turning left
- The traffic behind the turning driver
- The driver who reaches the intersection first
- Oncoming traffic
Show answer
Correct answer: Oncoming traffic
With a flashing yellow left-turn arrow you must yield to oncoming traffic and pedestrians, which have the right-of-way.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
According to the manual, what does a flashing red arrow generally mean?
- All turns in the direction of the arrow are prohibited until a green signal
- You may turn after yielding to oncoming traffic
- You may turn after slowing down and looking both ways for traffic
- You may turn only if no pedestrians are crossing
Show answer
Correct answer: All turns in the direction of the arrow are prohibited until a green signal
In general a red arrow prohibits turns in its direction, and you must wait for a green signal.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
When a green arrow is lit, what may you do?
- Turn only after the red light has gone off and the green light is on
- Turn only if there is no oncoming traffic
- Turn in the direction of the arrow, even when the red light is still on
- Go straight through the intersection
Show answer
Correct answer: Turn in the direction of the arrow, even when the red light is still on
A green arrow lets you turn in its direction even though the red light remains lit.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
If you are in a turning-only lane, what must you wait for?
- A green light
- The arrow
- A police officer’s signal
- A break in the pedestrian traffic
Show answer
Correct answer: The arrow
In a turning-only lane you must wait for the arrow signal.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
At a green arrow, which maneuver may you make unless signs give other information?
- Any turn, or going straight ahead
- Only going straight
- A U-turn
- Only the turn the arrow indicates
Show answer
Correct answer: Only the turn the arrow indicates
You may make only the turn the arrow shows unless signs say otherwise.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
If there are turning lanes at a signal, what must you do to make the turn?
- Be in the proper lane
- Turn from any lane once the arrow is lit
- Wait in the lane you are already in
- Wait until all lanes are clear
Show answer
Correct answer: Be in the proper lane
Where turning lanes exist, you must be in the proper lane to make the turn.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 26 · Open this page in the manual (Manual page 26)
-
What does a red X over a lane control signal mean?
- Clear the lane
- The lane is open for traffic
- Don’t use the lane
- Left turn permitted
Show answer
Correct answer: Don’t use the lane
The red lane control signal means the lane must not be used.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 27 · Open this page in the manual (Manual page 27)
-
What does a steady yellow X on a lane control signal mean?
- Don’t use the lane
- Clear the lane
- The lane is open for traffic
- Left turn permitted
Show answer
Correct answer: Clear the lane
A yellow X tells drivers to clear the lane.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 27 · Open this page in the manual (Manual page 27)
-
What does a flashing yellow X on a lane control signal mean?
- Don’t use the lane
- The lane is open for traffic
- Stop and wait for a green arrow
- A left turn is permitted
Show answer
Correct answer: A left turn is permitted
When the yellow X is flashing, a left turn is permitted.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 27 · Open this page in the manual (Manual page 27)
-
What does a green arrow pointing down over a lane mean?
- The lane is open for traffic
- Clear the lane
- Don’t use the lane
- A left turn is permitted here
Show answer
Correct answer: The lane is open for traffic
A green lane control signal shows that the lane is open for traffic.
Source: Oklahoma Driver Manual (2025 (updated November 24, 2025)), page 27 · Open this page in the manual (Manual page 27)