Kentucky: Freeway driving Practice Test
Choosing a lane on a multi-lane highway, entering and exiting, and keeping right except to pass.
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
Questions are original and based on the official manual "Kentucky Driver Manual" (Updated July 23, 2026), Kentucky State Police.
All 15 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
Mopeds cannot be operated on limited-access highways where the minimum speed is more than what?
- 25 miles per hour
- 40 miles per hour
- 55 miles per hour
- 30 miles per hour
Show answer
Correct answer: 30 miles per hour
Mopeds cannot be operated on limited-access highways where the minimum speed is more than thirty (30) miles per hour.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 3 · Open this page in the manual (Manual page 3)
-
On a road with three or more lanes in one direction, the middle lane or lanes are for what?
- Buses and trucks only
- Emergency vehicles only
- Through traffic
- Drivers who want to stop
Show answer
Correct answer: Through traffic
The middle lane or lanes of a road with three or more lanes in one direction are for through traffic.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 46 · Open this page in the manual (Manual page 46)
-
On a road with three or more lanes in one direction, who is the left lane for?
- Drivers who plan to exit or turn right
- Drivers who want to pass or turn left
- Drivers who want to go slower
- Vehicles that are entering the road
Show answer
Correct answer: Drivers who want to pass or turn left
The left lane is for drivers who want to pass or turn left.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 46 · Open this page in the manual (Manual page 46)
-
On a road with three or more lanes in one direction, the right lane is used by drivers who do what?
- Want to travel faster than the other traffic or turn left
- Want to pass other vehicles or make a U-turn
- Plan to remain in the lane for through traffic only
- Want to go slower or who are entering or turning right
Show answer
Correct answer: Want to go slower or who are entering or turning right
The right lane is used by drivers who want to go slower or who are entering or turning right.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 46 · Open this page in the manual (Manual page 46)
-
If a road has only two lanes in one direction, which lane generally has the smoothest traffic flow?
- The right lane
- The left lane
- The lane with the most vehicles
- Both lanes have the same flow
Show answer
Correct answer: The right lane
On a road with two lanes in one direction, the right lane generally has the smoothest traffic flow, and the left lane is reserved for passing.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 46 · Open this page in the manual (Manual page 46)
-
What does the manual say about remaining in the left lane on a limited access highway?
- It is allowed if you drive the speed limit
- It is allowed during daytime
- It is illegal
- It is allowed when traffic is light
Show answer
Correct answer: It is illegal
Remaining in the left lane on a limited access highway is illegal.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 46 · Open this page in the manual (Manual page 46)
-
When entering a multi-lane highway, what should you use the acceleration lane to do?
- Stop and wait for a gap before pulling onto the roadway
- Travel slower than other vehicles until you reach the roadway
- Pass slower vehicles before you reach the roadway
- Reach the speed of other vehicles before pulling onto the roadway
Show answer
Correct answer: Reach the speed of other vehicles before pulling onto the roadway
The acceleration lane is used to reach the speed of other vehicles before pulling onto the roadway.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
When you enter a multi-lane highway, who has the right of way?
- The existing traffic
- The vehicle entering from the ramp
- The vehicle that arrived first
- The faster vehicle
Show answer
Correct answer: The existing traffic
The existing traffic has the right of way, so you make sure it is clear before you merge.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
After you merge with the traffic flow when entering a multi-lane highway, what should you do with your turn signal?
- Leave it on until you pass the next exit
- Switch to your hazard flashers
- Cancel it
- Flash it twice more
Show answer
Correct answer: Cancel it
After merging with the traffic flow, you cancel your turn signal.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
When you plan to exit a roadway, what should you do early to avoid a quick lane change?
- Slow down while still in the left-most lane
- Get in the lane closest to your exiting point
- Turn on your hazard lights
- Move to the left lane to see the exit
Show answer
Correct answer: Get in the lane closest to your exiting point
You get in the lane closest to your exiting point early to avoid a quick lane change.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
While you are still on the main roadway before an exit, what should you do about your speed?
- Slow to the posted speed of the exit ramp
- Begin slowing to the speed of the deceleration lane
- Reduce your speed by half
- Maintain your vehicle speed
Show answer
Correct answer: Maintain your vehicle speed
You maintain your vehicle speed as long as you are on the main roadway when exiting.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
When exiting a roadway, where should you move after you signal your intention?
- Into the deceleration lane
- Onto the shoulder
- Into the acceleration lane
- Into the left-most lane
Show answer
Correct answer: Into the deceleration lane
After signaling your intention to exit, you move to the deceleration lane and slow down.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
When exiting a roadway, what should you check for the deceleration lane?
- The distance to the next exit
- Whether the lane has a solid line
- The posted speed
- The number of vehicles behind you
Show answer
Correct answer: The posted speed
When exiting, you check the posted speed for the deceleration lane.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 47 · Open this page in the manual (Manual page 47)
-
On an interstate, you are approaching parked vehicles on the shoulder. What should you do before passing them?
- Slow down and stay in the right lane while passing next to them
- Sound your horn and stay in the right lane
- Stop behind them until they pull away
- Safely move to the left lane, then back to the right lane after passing
Show answer
Correct answer: Safely move to the left lane, then back to the right lane after passing
The manual says to move to the left lane safely before passing vehicles parked on the shoulder and then back to the right lane after passing.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 53 · Open this page in the manual (Manual page 53)
-
You have passed your exit on an interstate or freeway. What should you do?
- Proceed to the next exit and work your way back
- Back up carefully along the shoulder to the exit
- Stop and make a turnaround at the nearest opening
- Slow down and turn around when traffic is clear
Show answer
Correct answer: Proceed to the next exit and work your way back
The manual says never to back up or try to turn around after passing your exit. Proceed to the next exit and work your way back to where you want to go.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 53 · Open this page in the manual (Manual page 53)