Kentucky: Emergency vehicles and work zones — Part 2 Practice Test
Questions in this part include: “Why should you never try to run from law enforcement?” · “When you can, what should you do about work zones?”
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
Questions are original and based on the official manual "Kentucky Driver Manual" (Updated July 23, 2026), Kentucky State Police.
All 18 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
During a traffic stop, what should you do about getting out of your vehicle?
- Get out right away and meet the officer at the rear bumper
- Get out so the officer can see your hands
- Get out if you think the officer is taking too long
- Remain in the vehicle unless requested to get out
Show answer
Correct answer: Remain in the vehicle unless requested to get out
You should answer the officer’s questions fully and clearly and remain in the vehicle unless requested to get out.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 65 · Open this page in the manual (Manual page 65)
-
If you receive a citation at a traffic stop, what should you do?
- Explain why the citation is wrong
- State your complaint to the officer at the roadside
- Ask the officer to cancel the citation
- Remain calm and not argue with the officer
Show answer
Correct answer: Remain calm and not argue with the officer
Roadside traffic stops are not the proper or safe place to lodge complaints or resolve disputes.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 65 · Open this page in the manual (Manual page 65)
-
Why should you never try to run from law enforcement?
- The officer will always radio ahead and set up a roadblock
- The consequences are often more severe than the initial citation
- It makes the traffic citation larger by a fixed amount
- It automatically ends your license for ten years
Show answer
Correct answer: The consequences are often more severe than the initial citation
Running is very dangerous, many fatal crashes occur from police chases, and the consequences are often more severe than the initial citation.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 65 · Open this page in the manual (Manual page 65)
-
Once the officer has indicated the traffic stop is finished, what should you do first as you drive away?
- Wait for the officer to return to the law enforcement vehicle
- Pull out immediately to clear the roadside for other traffic
- Get out and thank the officer for the courteous stop
- Turn off your hazard flashers and speed up to merge
Show answer
Correct answer: Wait for the officer to return to the law enforcement vehicle
The steps for driving away begin with waiting for the officer to return to the law enforcement vehicle.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 65 · Open this page in the manual (Manual page 65)
-
What should you use to reenter traffic after the officer has indicated the traffic stop is finished?
- Your horn
- Your high beams
- Your turn signal
- Your hazard flashers
Show answer
Correct answer: Your turn signal
One of the steps for driving away is to use your turn signal to reenter traffic and obey all traffic laws.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 65 · Open this page in the manual (Manual page 65)
-
When you approach an authorized emergency vehicle stopped on the roadside, how should you yield the right-of-way if safety and traffic conditions permit?
- By changing into a lane not next to the emergency vehicle
- By stopping in the lane next to the emergency vehicle
- By staying in your lane and sounding your horn
- By moving onto the shoulder behind the emergency vehicle
Show answer
Correct answer: By changing into a lane not next to the emergency vehicle
You should slow and yield by making a lane change into a lane not next to that of the authorized emergency vehicle if safety and traffic conditions permit.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 66 · Open this page in the manual (Manual page 66)
-
What should you do when approaching an authorized emergency vehicle stopped on the roadside if a lane change is unsafe?
- Stop completely until the emergency vehicle leaves
- Change lanes anyway and flash your headlights
- Speed up to get past it quickly
- Slow down and proceed with caution
Show answer
Correct answer: Slow down and proceed with caution
If a lane change is unsafe, you should slow down and proceed with caution while maintaining a safe speed for traffic conditions.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 66 · Open this page in the manual (Manual page 66)
-
What does Kentucky law require when you approach police or other emergency vehicles stopped on the shoulder of the roadway?
- Come to a complete stop behind them
- Turn on your hazard flashers and pass
- Exercise due caution
- Pull onto the shoulder ahead of them
Show answer
Correct answer: Exercise due caution
Kentucky law requires drivers to exercise due caution when approaching police or other emergency vehicles stopped on the shoulder of the roadway.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 66 · Open this page in the manual (Manual page 66)
-
On a four-lane highway, what does Kentucky law say to do when approaching police or other emergency vehicles stopped on the shoulder?
- Approach slowly and move into the right lane if it is safe to do so
- Stop in the right lane until they leave
- Approach slowly and move into the left lane if it is safe to do so
- Speed up and move into the left lane
Show answer
Correct answer: Approach slowly and move into the left lane if it is safe to do so
On four-lane highways Kentucky law says to approach slowly and move into the left lane if it is safe to do so.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 66 · Open this page in the manual (Manual page 66)
-
On a two-lane highway, what does Kentucky law say to do when approaching police or other emergency vehicles stopped on the shoulder?
- Approach slowly and pass with caution
- Stop and wait until they leave
- Move into the left lane and speed up
- Pull onto the shoulder behind them
Show answer
Correct answer: Approach slowly and pass with caution
On two-lane highways Kentucky law says to approach slowly and pass with caution.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 66 · Open this page in the manual (Manual page 66)
-
What should you do when you approach a work zone and see no workers?
- Keep your normal speed
- Speed up to clear the area sooner
- Follow the vehicle ahead more closely
- Still reduce your speed
Show answer
Correct answer: Still reduce your speed
Speed should always be reduced in a work zone, even if there are no workers, because narrower lanes and rough pavement can create a hazard.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
What should you do with your following distance in a work zone?
- Shorten it
- Increase it
- Keep it the same as on any road
- Ignore it when no workers are present
Show answer
Correct answer: Increase it
In a work zone you should reduce speed, increase following distance, watch the traffic around you, and be prepared to stop.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
How much caution should you use when driving through a work zone at night?
- Extreme caution, but only if workers are present
- Normal caution, because there is less traffic
- Extreme caution, whether workers are present or not
- Normal caution, if the work zone is lit
Show answer
Correct answer: Extreme caution, whether workers are present or not
The manual calls for extreme caution in a work zone at night whether workers are present or not.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
Why should you adjust your lane position in a work zone?
- To allow space for workers and construction vehicles
- To get around slower traffic more quickly and easily
- To keep your vehicle as close as possible to the cones
- To stay as near as you can to the oncoming lane
Show answer
Correct answer: To allow space for workers and construction vehicles
Lane position should be adjusted to allow space for workers and construction vehicles.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
Until when should you observe the posted work zone signs?
- Until you see “End Road Work.”
- Until you pass the last worker
- Until the speed limit sign changes
- Until you reach the next intersection
Show answer
Correct answer: Until you see “End Road Work.”
Posted work zone signs should be observed until you see “End Road Work.”
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
How does the manual say to plan for delays at work zones?
- Drive faster between work zones
- Follow closely to move through quickly
- Leave early to reach your destination on time
- Stop and wait for the delay to clear
Show answer
Correct answer: Leave early to reach your destination on time
Drivers should expect delays, plan for them, and leave early to reach their destination on time.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
When you can, what should you do about work zones?
- Drive through them at night when traffic is lighter
- Use alternate routes and avoid them
- Pass through them in the lane farthest from workers
- Follow a large vehicle through them
Show answer
Correct answer: Use alternate routes and avoid them
Where possible, drivers should use alternate routes and avoid work zones.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)
-
What is a work zone?
- An area where only emergency vehicles may stop
- An area marked for parking construction equipment
- A highway section closed to all traffic
- An area where roadwork takes place
Show answer
Correct answer: An area where roadwork takes place
A work zone is an area where roadwork takes place and may involve lane closures, detours, and moving equipment.
Source: Kentucky Driver Manual (Updated July 23, 2026), page 69 · Open this page in the manual (Manual page 69)