Hawaii: Pavement markings — Part 1 Practice Test
Questions in this part include: “What tells you the proper lane to drive in on a roadway marked with traffic lanes?” · “You must not pass when there is what kind of line in your lane?”
Independent educational site · not affiliated with any government agency or DMV
Ready? Test yourself
- Instant feedback with an explanation
- Every answer cites its source in the manual
- Your best score is saved on this device
Questions are original and based on the official manual "Hawaii Driver's Manual" (2023), Hawaii Department of Transportation.
All 18 questions in this practice test
Take the test above first, then use this list to study. Tap “Show answer” to see the correct answer and explanation.
Show the questions and answersHide the questions
-
What tells you the proper lane to drive in on a roadway marked with traffic lanes?
- Signs or pavement markings
- The lane position of the car ahead
- The speed of the surrounding traffic
- Your destination alone
Show answer
Correct answer: Signs or pavement markings
The manual says to drive in the proper lane as indicated by signs or pavement markings.
Source: Hawaii Driver's Manual (2023), page 26 · Open this page in the manual (Manual page 26)
-
You must not pass when there is what kind of line in your lane?
- A solid yellow line
- A broken yellow line
- A broken white line
- A white stop line
Show answer
Correct answer: A solid yellow line
Do not pass when there is a solid yellow line in your lane.
Source: Hawaii Driver's Manual (2023), page 31 · Open this page in the manual (Manual page 31)
-
What are pavement markings?
- Lines, words or figures marked with paint, reflectors or other markers
- Only painted lines that are applied along the road shoulder and curb
- Signs that are mounted on poles beside the road or over it
- Only reflectors that are placed in the center of the traffic lane
Show answer
Correct answer: Lines, words or figures marked with paint, reflectors or other markers
Pavement markings are lines, words or figures marked on the pavement with paint, reflectors or other markers.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
What is the purpose of yellow centerlines?
- To separate lanes of traffic moving in the same direction
- To mark the right edge of the roadway
- To show the exact place at which to stop
- To separate traffic moving in opposite directions
Show answer
Correct answer: To separate traffic moving in opposite directions
Yellow centerlines are used to separate traffic moving in opposite directions.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
A single broken yellow line marks the centerline of a road with only two lanes of traffic. When may you cross it?
- Never, under any circumstances
- When it is safe, to pass another vehicle
- Only to make a left turn into a driveway
- Only when the road ahead is a divided highway
Show answer
Correct answer: When it is safe, to pass another vehicle
You may cross a single broken yellow line to pass another vehicle when it is safe.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
On which side of a single broken yellow centerline must you drive?
- To the right of it
- To the left of it
- On either side, as you choose
- Directly on top of it
Show answer
Correct answer: To the right of it
The manual says you must drive to the right of this centerline.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
What do double solid yellow lines in the center of the roadway mean?
- Passing is allowed in one direction only
- Passing is allowed when it is safe
- Passing is prohibited in both directions
- The center lane is for left turns only
Show answer
Correct answer: Passing is prohibited in both directions
Double solid yellow lines mark the center of the roadway where passing is prohibited in both directions.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
You may cross double solid yellow lines only for which purpose?
- To pass a slow vehicle when the road ahead is completely clear
- To make a left turn into or from an alley, private road or driveway
- To go around a vehicle that is stopped ahead in your own lane
- To make a U-turn on a street that has very little traffic
Show answer
Correct answer: To make a left turn into or from an alley, private road or driveway
You may cross double solid yellow lines ONLY to make a left turn into or from an alley, private road or driveway.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
What does a single solid yellow line on a two-lane road indicate?
- A zone where passing is allowed when it is safe
- A lane that is reserved for buses only
- A lane that is used only for left turns
- A zone where passing is prohibited
Show answer
Correct answer: A zone where passing is prohibited
No passing lines are single solid yellow lines used on two-lane roads to indicate zones where passing is prohibited.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
When may you cross a no passing line (a single solid yellow line)?
- Whenever the oncoming lane is clear of traffic for a long way ahead
- When you are driving slower than the posted speed limit of the road
- Only to make a left turn into or from an alley, private road or a driveway
- Whenever you need to pass a bicycle or another slow moving vehicle
Show answer
Correct answer: Only to make a left turn into or from an alley, private road or a driveway
You may cross a no passing line ONLY to make a left turn into or from an alley, private road or a driveway.
Source: Hawaii Driver's Manual (2023), page 33 · Open this page in the manual (Manual page 33)
-
What do white lines on the roadway separate?
- Lanes of traffic moving in the same direction
- Lanes of traffic that move in opposite directions
- The edge of the roadway from the shoulder area
- Lanes in which passing is always prohibited
Show answer
Correct answer: Lanes of traffic moving in the same direction
White lines separate lanes of traffic moving in the same direction.
Source: Hawaii Driver's Manual (2023), page 34 · Open this page in the manual (Manual page 34)
-
What are you required to do with respect to white lane lines?
- Drive on the lane lines to keep to the center
- Keep your left wheels on the lane line
- Straddle the lane line when passing
- Drive between the lane lines
Show answer
Correct answer: Drive between the lane lines
You are required to drive between white lane lines.
Source: Hawaii Driver's Manual (2023), page 34 · Open this page in the manual (Manual page 34)
-
When may you cross a single dashed white lane line?
- Only in unusual circumstances
- When you can do so safely
- Never, because it is prohibited
- Only to make a left turn into a driveway
Show answer
Correct answer: When you can do so safely
Single dashed white lane lines may be crossed when you can do so safely.
Source: Hawaii Driver's Manual (2023), page 34 · Open this page in the manual (Manual page 34)
-
What does a single solid white line indicate?
- Movement from lane to lane is hazardous
- Movement from lane to lane is prohibited at all times
- You may change lanes whenever you wish
- The lane is reserved for turning vehicles only
Show answer
Correct answer: Movement from lane to lane is hazardous
Single solid white lines indicate that movement from lane to lane is hazardous.
Source: Hawaii Driver's Manual (2023), page 34 · Open this page in the manual (Manual page 34)
-
What does the width of a solid white line tell you?
- The wider the line, the higher the speed limit
- The wider the line, the more lanes are ahead
- The wider the line, the greater the hazard
- The wider the line, the less the hazard
Show answer
Correct answer: The wider the line, the greater the hazard
Single solid white lines indicate that lane changes are hazardous, and the wider the line, the greater the hazard.
Source: Hawaii Driver's Manual (2023), page 34 · Open this page in the manual (Manual page 34)
-
When may you cross a single solid white line?
- Whenever there is no traffic in the next lane
- Only in unusual circumstances and then only with great care
- Whenever you signal at least 100 feet before the line
- Only to make a left turn into an alley
Show answer
Correct answer: Only in unusual circumstances and then only with great care
You may cross a solid white line ONLY IN UNUSUAL CIRCUMSTANCES AND THEN ONLY WITH GREAT CARE.
Source: Hawaii Driver's Manual (2023), page 34 · Open this page in the manual (Manual page 34)
-
What do double solid white lines indicate?
- Movement from lane to lane is hazardous but allowed
- Lane changes are allowed when it is safe
- The roadway ahead must not be entered
- Movement from lane to lane is prohibited
Show answer
Correct answer: Movement from lane to lane is prohibited
Double solid white lines indicate that movement from lane to lane is prohibited, and you must not cross them.
Source: Hawaii Driver's Manual (2023), page 35 · Open this page in the manual (Manual page 35)
-
What is the rule for crossing a double solid white line?
- You may cross it only with great care
- You may cross it when you can do so safely
- You must not cross it
- You may cross it only to make a left turn
Show answer
Correct answer: You must not cross it
You MUST NOT cross a double solid white line.
Source: Hawaii Driver's Manual (2023), page 35 · Open this page in the manual (Manual page 35)